How to upgrade CHEAP Walmart RC Car Truck Lipo Mod Flysky receiver Hobby Grade Controller

preview_player
Показать описание

#howto #rc #cheap #walmart #lipo #jaydrone
Рекомендации по теме
Комментарии
Автор

You can also leave the mini esc for rear, since that works good 👍. Then upgrade steering with a metal gear servo and plug it to channel 1 port in receiver and have 100% proportional steering 👌

Modifier-RCs
Автор

You do not need a second esc or to install a servo, only a servo circuit board with original toy grade steering motor wires soldered to the new board. Then plug the board into correct channel at receiver. Plug in your esc, install you battery, modify the body with quick pins, install a higher amp 180 motor, from a mini z, pn racing, or a xmod. A flysky radio will allow you end point and dual rate adjustments on steering and throttle.

billyeason
Автор

Would like to see how much the performance improved

robertredzich
Автор

I assume the original steering uses solenoids. I might just do this. I wish my electronics was as easy to access as yours. I'll switch to a lithium 18650 in place of the wimpy cordless phone battery as well.

joewoodchuck
Автор

Wow I thought the controller could just scan and take over the frequency this is more complicated than I first thought

ComedyTech
Автор

So I have a question I have Hans Rx7 that I got from Walmart how do I run a full headlights and taillights system on the car what will I have to upgrade or buy ?

NO_TOWN_LIMITS
Автор

This is very cool for showing this type of video because certain RC videos do not show this especially if it was for kids I would like to modify it can it be possible

cocoandiesnow
Автор

excellent video! did you use a 7.4 battery pack?

bseenature
Автор

How do you hook up the steering? Did you switch it out with a servo?

Random_
Автор

I missed where you connected the RC Control module. I have exact same RC as yours here and the main board only turns the wheels but won't go fw or reverse. I id the problem with a transistor but they are too small to work with and there may be some more I haven't find so I want to use your method. I just need to find a good but not too expensive handheld controller. I hope anyone can post a possible solution. TIA.

XXEquiz
Автор

How would I do this if I have a 4wd rc car? Would I just connect both motors to the single esc?

srshoota
Автор

I'm modifying my sons mega grave digger. We got for free with out remote.

emiliobonet
Автор

Jay u recon it’s going to be reliable the proportional

wolfymaceastern
Автор

Can you Change motors on the Polaris RZR RC Car

phoenixarizona
Автор

rc car review after one year next vido

rogelioacma