How To Install Concrete Anchors For Deck Railing #diy #build #construction

[mrboyban]

Exactly what I was looking for, thanks

[hoganlogan]

I instantly pause the video the moment I hear that STUPID ROBOT GIRLS VOICE!!! and move right on to the next video!!!

[randomfellow]

Can confirm, make sure that nut is out of the way or it’ll anchor in but the nut won’t break free. Had to cut and anchor bolt and install a new bolt on either side to anchor my post

[TechieTard]

you should NOT have to hit that nut in hard, if you do, expect those threads to be bent and knurled. If that happens, you will need a tap/die set and need to use the die to straighten out the threads.

[michaelpayne]

Wow, you hit it on the head. Exactly what I was looking for thanks.

[TheGrilledCheeseSandwich]

Definitely don’t hammer on that bolt. Thread the bolt in at-least 1/4 inch below. So you don’t goof the threads.

[tomdixon]

Trying to remove these from the brick wall of my house and they have been in 20+ years. Not having much luck getting them out, may have to cut them off and knock them in or something.

[taraisenberg]

How did you make the hole it went into?

[kennardshire]

Why you backing off the nut??? There's a whole 15mm of no thread when I drive a dynabolt I just bash the thing doesn't matter where the nut is as long as it isn't held on the bolt by one thread