Concrete Anchor #shorts

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

These people in the comments must be special it's clearly a demonstration of how the anchor works in the ground where you can't normally see, it's called a crosscut demonstration duh smh

kenjiyugo
Автор

Exactly what i needed! I was wondering how concrete bolts "gripped" to the concrete. Thank you!

avilesnba
Автор

These anchors work great if the hole is intact

DAngelo
Автор

OP must be losing faith in humanity after looking at these comments.

Thanks for the demonstration!

zonkeymaker
Автор

this video basically cleared most of my questions and its so simple and short

Автор

These anchors work good when used properly

danielburridge
Автор

should i only use these in the floor? I was going to use them to mount a hose reel on brick.

yourbigheadcousin
Автор

This trick would work if you were mounting something to a wall where the weight force was perpendicular to the hole.

davidbartilson
Автор

For heavy duty/ loading, Air brick insertions are strengthened by a special injected product, but you will need professional advice as the product is rapid setting.
Interesting video why do they show the destruction of the hole when removing this type of anchor? There should be a better explanation in the comments by the experts.

hugoanson
Автор

Thanks for the demonstration! I understand that this is a cross-cut, so hence the chipping.

When done using a proper hole, would you expect similar chipping to happen inside? Brick or concrete? Thanks!

pas
Автор

These types of anchors don’t come out (easily) so this would be a more permanent solution, these work great in the field

royce
Автор

To do this video properly, we need someone to invent transparent concrete 😋

kwikbit
Автор

I have 4 inch hollow brick layer over the regular brick-cement wall. How can I fix my split AC on such a wall. Anchor bolts are not that long.

ExcelTimeSavers
Автор

The bricks at mine must be only about as strong as that breeze block because these don’t tighten just crumble the brick and pull out like it does in this cross cut on soft block 😅

subhumanrogueminiaturesfor
Автор

So is it supposed come off like that or no? I thought you’d tried different ways to anchor it but after the third time I realized the clip was on loop😂

juntrung
Автор

Misguiding video. The hole is partial for creating the video, thereby the concrete provides very little retaining force for the anchor.

rsinghglobal
Автор

put some Epoxy in there before and then do it and hope for the best or what?

ASSOL
Автор

(not a builder at all btw)
but wont anchor be better when seated as the concrete sets? because its gonna be wearing away inside out by the looks of it

IVE.EVN
Автор

Also that’s a sleeve anchor ment for masonry not concrete. Wedge anchor or epoxy anchor works best

fattydaddy
Автор

Этот анкер отлично работает в бетоне, а не в гозоблоке да ещё и усечённое отверстие.

BSI_spb