How It Works: Wedge Anchors | Allfasteners Australia

Wedge Anchors use an expansion clip to grip to the walls of embedment holes while the nut is tightened at the top. The collar expands and "wedges" itself against the material wall and shank of the bolt, successfully holding the fixture in place.

[MessedUpBrainspike]

I searched for a video that showed how these things work, out of curiosity. And I found exactly what I looked for, short and sweet. Thank you!

[DUYTRAN-vvnn]

man, clean and clear like distilled water, thanks.

[CalvinHikes]

Was looking for an anchor bolt setting video with Disco music.

[Kevink-lemd]

this is incredible. fully expected to get some 10 minute filler vidoe i had to jump around in to find a 15 second answer.

instead all i found was the 15 second answer with the most clear and obvious visual ive ever seen. ty and god bless.

[MikeZ]

As perfect an explanation as possible. I’m bolting some of my shop tools to the floor and didn’t know if these were for pre-drilled holes or wet concrete

[Coolguy]

I’m gonna need this for my galvanized square steel and eco friendly wooden veneers

[patmcbride]

My problem was that my masonry pit was the size recommended, but the bolt would not got all the way in.
I had to cut some off the top.

[MrOwnerxD]

Its impossible to tighten because the bolt inside is moving with the nut

[CookinWithLeland]

Searched it up, exactly what I was looking for

[hjvjtly]

Helpful video though can you advise on torque when tightening nut?

[Raviranjankumar-jfjs]

What should be size of drill??? if the foundation/anchoring bolt size is 16 mm ??


14 mm drill size ?? Or same 16 mm same as bolt size ? Pls tell me . 🙄

[jamesr]

Everything you needed to know in 25 seconds.

[punkeasy]

Can you do one on how to remove them.
I suggest you use d3ath meatal music in the background though.

[LARAIDER]

Hello. I accidentally drilled 5 in deep but my bolt only 3 in long will it still work? Bolt size is 3/8. Thank you

[TuneRawkz]

Any suggestions if the hole was drilled too big and the entire screw spins? HELP!

[mkengineering]

Dear Sir Please Tell me the name of Software ?

[waheedmalik]

What if the slab is less in depth and the bolt goes through it all the way?

[maximalniy]

I can't understand, the insert is rotating along with the nut and it can't be tightened

[Dragon-Slayr]

Anchor sand coat hanger got moved to the top as an cross bow which became cinderellas royal carraige then became a staple croc

Altair 😂

[kennethcollins]

can you tell me how to remove wedge anchor?