Using Z Hop in Cura for the CR6-SE | Making Flush Inlays

#creality #3DPrinting #ZHop

◼◼ My stuff! ◼◼
___________________________________________

◼◼ A list of items I use. (Affiliate links) ◼◼
___________________________________________

As an Amazon Associate, I earn from qualifying purchases.
It doesn't cost you more, but I do make some pocket change on the sale.
___________________________________________

[larrybud]

4:20 To remove stuff from the build plate, take your scraper and put it up against the part. Then take a semi-heavy object, I use some pliers, and tap the end of the handle. Pops the print right off. But I'm going to have to try this for some golf ball markers with my logo. I was filling the empty spot with colored epoxy resin (which actually gave it some weight), but would love to see how this turns out.

[robertnusser]

@2:20 you mentioned you flipped the print bed over to the glass side up. Would you mind telling us what kind of print bed that is.... sounds rather useful!

[axmpssm]

Oh, I learned something. Great tutorial!

[thenasman]

Is there a way to disable "Z-hop when retracted" after the first print is covered? This would greatly reduce print time if you have a higher thickness in the second print as this setting would not be needed after the inlay is covered

[randyr]

I have an Ender 3 V2 with the bed auto level add-on. It touches the build plate in 9 locations before printing. I'll need to make sure to avoid those locations when printing one or more.

[jamesgoff]

I have the z hop problem with large prints .

[John-yyhh]

I use Cura 15 with the CR-6, can I stop the centre touch on start up as I can shift the Y axis away on Cura 15

[GiovanniMorenoMusic]

This is cool.. definitely have to try this
Is it possible to do it with 3 colors aswell? Like a black letter in a circle with 2 sides of colors on the circle?

[jabianaya]

Hola acabo de comprar una cr6 he visto que le pones mejoras a tu cr6 me puedes decir que resultado tienen ? Me puedes decir cuáles son las mejoras que le as hecho a tu impresora ? Gracias

[Michaelhood]

Did you really need to z hop on the first part of the print or could you just do it on the second to save time?

[KevinPiccandFR]

Comment faites vous pour éviter le bed levelling quand vous lancez le 2ème print...? Si je fais un bed levelling, celui-ci tombe sur ma pièce imprimée... Et si j'en fais pas, l'impression me croche pas.. Des solutions ?

[jayd]

0.4 nozzle does not equal 0.4 thickness.

[jf]

Maybe I'm not understanding Z-hop. But wouldn't you jump .5 to be sure and clear .4?

[HTTK]

How many mm should I set the Z Hop Height?

[lafamille]

je peux effectuer ce gcode sur la flsunv400 mais ou est le gcode lol

[GiovanniMorenoMusic]

Only use z hop on the top part right? Will probably try it this week