PET filament for 3d printing DIY milk bottle recycling

[OndrejSraitr]

Congrats to your own modified petamentor! ❤️😁

[greenwitcher]

Great but never forget cooling it down using a fan, it's important!

[GokhanCan-qu]

Can you give detailed information about how you did it, what materials you used?

[rcbasher]

Nice Idea! I am planning too to do Something Like this. So you have a Print File or Something Like a Link to Print the Cutter holder? That Cuts the bottle?

[JAB]

I’m trying to set up something like this. I’m just wondering how your controlling the hot end?

[jayday]

Really cool. Question!, how long would it take to filament the entire bottle? Very curious thanks 😁👍

[wavywave]

Where can I find the stl for the cutter because I have a pet machine as well but I’ve been struggling getting the bottles cut to the right size

[BigHardFard]

You straight up made homemade PET filament, nice.

[Dtest]

Is the filament hol? Or filled in? My inn is always empty

[sougata]

Can you give the details
That how to control the temperature of this instrument.
I have an assignment on this instrument in my institute.please❤

[CBKCUSTOM]

Can i have the stl of bottle cutter thankyou

[BrendaRosas]

Ay what speed does the motor goes so that the filament stays in standard 1.75 mm diameter? And the temp of the noodle? Great job by the way!

[richardtapia]

Hey bro, could you give me the gcode of the pet cutter? Thanks a lot bro, blessings.

[yousefgharaibeh]

Can you share the spool and motor mount file that pull the filament please.

[comebackcomeback]

Sistemde kullanılan malzeme fisteai ve stl dosyaları nerede ?

[serkancetinkaya]

Hello friend, could you please share the STL file of the materials printed on the printer you use on this machine?

[granola]

Please give me a name or a link to buy this heater

[thibaultgauthier]

Hi im french and i try too build some thing like that (not same machine but same idea) i begin by create a machine wis a big stepmotor and some fan too could down the filament but there Is one issue, mi filament Is always hollow mi first try was by using a hot glue gun but that not work cause my fillement was hollow so i buy a 3d nozzel and it was... Hollow. So here i am maybe it's my nozzel (not hot enough) or maybe my bottel (too hard too melt) or maybe the power supply....

has anyone ever had the same problem

[Ram_nam_sath_hai]

What hotend temperature to make the Filaments.

[andileinocent]

hey what speed and force and types of motor you used to pull the bottle strip as it flows entering the nozzle, please reply me it urgently