Programming of AVR microcontroller using avrdude. full tutorial

preview_player
Показать описание
This video is about how to programming avr microcontroller using avrdude or cmd.There is lots of detail about how to interface avr microcontroller with avr programmer and how to load hex file into the avr microcontroller using cmd or avrdude.
  1. Prateek Kumar
  2. avr microcontroller
  3. avrdude
  4. programming
  5. atmel
  6. atmel studio
Рекомендации по теме
10 steps to 0:28:53

10 steps to start AVR microcontrollers

How to Program 0:04:01

How to Program ATMEGA8 / 48 /88 / 168 / 328 P | Arduino As ISP | AVR Microcontroller Programming

Tutorial:How to burn/program 0:05:55

Tutorial:How to burn/program a hex file to a AVR microcontroller using AVR Studio,USBasp,Burn-O-Mat

Adjusting code for 0:00:14

Adjusting code for AVR microcontroller #AVRProgramming #Innovation #AVR #atmel #atmega #program

How To Make 0:08:01

How To Make AVR Microcontroller Programmer

A Beginner's Guide 0:15:18

A Beginner's Guide to Microcontrollers

Stop Wasting Time, 0:10:39

Stop Wasting Time, Use AVR Timer Interrupts | Baremetal AVR Programming Tutorial

Programming of AVR 0:07:49

Programming of AVR microcontroller using avrdude. full tutorial

Data Transfer Instructions 0:17:38

Data Transfer Instructions and Programs in AVR Microcontrollers: Assembly Language Basics

How To Use 0:10:01

How To Use AVR Microcontroller? | Microcontroller Programming

IO Port Programming 0:26:57

IO Port Programming in AVR Microcontrollers: A Comprehensive Guide

Program AVR Microcontroller 0:06:05

Program AVR Microcontroller using AVR USBasp Programmer

Getting started with 0:12:52

Getting started with AVR microcontroller : LED Blinking

Introduction to Bare 0:15:26

Introduction to Bare Metal AVR Programming -- Microchip and Mouser Electronics

What is AVR 0:11:49

What is AVR microcontroller and how to get started with AVR

Blink LED Using 0:08:11

Blink LED Using AVR Atmega32 Microcontroller

AVR Programming using 0:09:00

AVR Programming using C Language | Why to Program the AVR in C Language | AVR C Data Types

USBASP AVR MICROCONTROLLER 0:00:15

USBASP AVR MICROCONTROLLER PROGRAMMER #shorts #experiment

Programming AVR microcontroller 0:09:46

Programming AVR microcontroller with Arduino IDE (Self made Arduino Prototype)

AVR Code Conversion 0:08:38

AVR Code Conversion Programming Using C Language | AVR Microcontroller Programming | ATmega32

Now You Can 0:05:00

Now You Can Program any Kind of IC With Arduino, (AVR, STM, P-IC)

Introduction to AVR 0:11:54

Introduction to AVR Microcontrollers: Basics and Key Features

Arithmetic Instructions and 0:08:16

Arithmetic Instructions and Programs in AVR Microcontrollers: Assembly Language Basics

Program any AVR 0:08:23

Program any AVR Microcontroller using Arduino (USBASP)

Комментарии
Автор

I am using an ATmega32u4 (adafruit circuit playground), and I am using the avr109 programmer (type butterfly). I am overriding the baud rate to be 115200.

This is the commandline argument that I am using(I used projectdir and Targetname here for ease of writing):
avrdude -v -p m32u4 -c avr109 -P COM5 -b 115200 -U

But, my problem is... when I upload my code... no matter which port I set to output, and make the ports high or low... nothing changes in my microcontroller (using asm) ... but when I code from arduino and upload my program... It works perfectly... Can you help me solve this problem?

dibbyabarua
Автор

How to read the hex file form atmega88pa-au, if any Protection

MultitekIndonesia
Автор

WARNING: AVRdude is such a shit application, I'm so shocked so many people recommend it. Like it's literally so shit that I would be willing to buy software to compensate for it. Also what's pissing me off is how Atmel, who charges you an arm and a leg for their programming devices, just doesn't port Atmel Studio to Linux, IDE/software is flawless compared to software used in different tool-chains.

iampyre
visit shbcf.ru