Tutorial:How to burn/program a hex file to a AVR microcontroller using AVR Studio,USBasp,Burn-O-Mat

This video will show you how to burn a hex file to a AVR microcontroller using USBasp Programmer and AVR Burn-O-Mat program.
Select the extracted folder as shown in the video

[StuffBuilder]

Windows Driver Enforcement needs to be disabled for the USBasp driver to install properly.
Google "Disable Driver Enforcement" and disable it.

[dmitridiaguilev]

Wow, bro, you are doing really good stuff, I'm your biggest admirer right from Canada here! I love the way you talk too: "mos-fet, con-trol", it sounds great!

[lukassevera]

OMG thank you so much. I have tried so many things but only yours work. I am so happy thank you again for this tutorial

[metafizikvip]

I'm using USBtinyisp and I tried a lot of methods end of the researches your method is working. Thank you very much

[psadlkfpsk]

If you have driver installation error (signature), try this!
Go to Start - Then Command Prompt
Enter command "shutdown /r /o /f /t 00"
Click the "OK" button
System will restart to a "Choose an option" screen
Then select "Troubleshoot" from "Choose an option" screen
Then select "Advanced options" from "Troubleshoot" screen
Then select "Windows Startup Settings" from "Advanced options" screen
Click "Restart" button
System will restart to "Advanced Boot Options" screen
Select "Disable Driver Signature Enforcement"
Restart & install drivers...

[johnmellor]

brilliantly explained tutorial very much appreciated thanks

[Amp_Expert]

I pulled the HEX data off of a ATMEGA168A micro into a .BIN file. I would like to convert it into it's native language (C/C+, whatever it was programmed in). HOW DO I DO THIS??

[jumbo]

My arduino is NaNo with ATMega168 (detected by Arvdudess program). Where can i get .hex file for it?

[dibyakantajana]

Bro i have a problem, when i opened avr burn o mat then there are showing error massage " error while reading config: attribute fuse is missing at node setting". How can I fixed it? Please help

[unkownuser]

What mistake did you make when first loading hex file to atmega8. At least let us know !!

[montanam]

Hello< thanks for the video, ,
I have STC 10F04XE I couldn't find the model in AVR Prog ?
Please advice, also I bought the same usbasp that you used in the video ?
Can I program STC 10F04XE by it ?

[chiranthmurthy]

Can set lock bits using this software?

[sanjivshukla]

I want to burn a hex code to an ATmega32A chip. Is the procedure the same as ATmega 32?

[thetnaing]

Your breadboard is so cool, apparent to HQ. Where is it available?

[Aryan-dysr]

What is the name of that light board you have plugged your micro controller on??

[harshalpawar]

I am using AT89C51 Microcontroller. So can i use USBasp for burning program onto the controller?

[ahmedarabe]

Hello sir, I did everything you said it, but this error occurs -->
WARNING: Unable to detect MCU


avrdude.exe: set SCK frequency to Hz
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: error: program enable: target doesn't answer. 1
avrdude.exe: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.

[sandeepsoni]

I don't find any option in the drop down menu of programmer. please help

[crazycoolguy]

help me in cloning a atmega128 16au using USBasp is it possible to make a copy of atmega128 au using USBasp programmer ..please help

[Dancopymus]

Can this procedure be in any AVR/ATmega microcontroller? Thanks.