Siglent DC power supply SPD3303X EMI radiation issues

see here, Conducted and Radiated EMI problems/challenge, when using this type of powersupply for radio level experiments. this is a nice linear supply, so it is not a switchmode,
BUT it contain a lot of digital ic's microcontrollers ethernet usb display, see this video for a short EMI info

#siglent
#emi
#radiation

--
I use auto generated subs, so if you find errors worth fixing, please comment with the time in the video you saw the error, i will be happy to fix it. This also apply to the Danish version.

[SeanBZA]

Time to go into the Siglent and first of all remove the trademark rust. Then take all the plastic parts, and use a can of shielding spray on the inside, to make a conductive film, and attach to the chassis ground. Then a 15A common mode choke on each output connection to replace the token ferrite bead, and it should tame it down a lot. Case halves also add a rivet on spade lug, and then a grounding braid with the spade connector, to RF ground them a little better than the screw and hope method does.