Siglent SPD3303X power supply bug found (1.01.01.02.07R2)

preview_player
Показать описание
brand new SPD3303X, BUG found, and yes it is running latest fw:
SPD3303X Firmware - 1.01.01.02.07R2 (Release Date 02.05.21 )
outputs will not turn on, random delays, red led at each output,
setpoints copied to read out display, both voltage and current sets, while 0V 0A is at the connectors.
Power recycled, now it works,
  1. Thomas Scherrer OZ2CPU Teardown
Рекомендации по теме
Siglent SPD3303X power 0:02:40

Siglent SPD3303X power supply bug found (1.01.01.02.07R2)

Siglent SDM3065X & 0:00:18

Siglent SDM3065X & SPD3303X Powered On For 48 Hours!!

#165 Siglent SPD3303X-E 0:47:14

#165 Siglent SPD3303X-E with OCP in latest firmware, Hands on and Upgrade

ER02 SPD3303X E 0:07:53

ER02 SPD3303X E unboxing

Siglent SPD3303X-E power 0:15:21

Siglent SPD3303X-E power supply diode bridge overheating fix - where I move the bridge rectifier.

ER02B: Siglent SPD3303X-E: 0:14:35

ER02B: Siglent SPD3303X-E: Evaluation

siglent SPD3303X versus 0:05:14

siglent SPD3303X versus MINLEAF NPS605W, noise, stability

SIGLENT SPD3303X-E Linear 0:03:36

SIGLENT SPD3303X-E Linear DC 3CH Programmable Power Supply unboxing!

New Siglent Power 0:25:25

New Siglent Power Supply For The Lab.

SIGLENT Power Supply 1:52:30

SIGLENT Power Supply Repair SPD3303X-E: 0-30v Powers itself off at random.

SIGLENT SPD3303X-E self-diagnosis 0:00:52

SIGLENT SPD3303X-E self-diagnosis mode

SIGLENT SPD3303X-E Unboxing 0:12:24

SIGLENT SPD3303X-E Unboxing

Siglent Technologies SPD3303X-E 0:03:08

Siglent Technologies SPD3303X-E Triple Output Power Supply

Siglent SPD3303X 0:01:44

Siglent SPD3303X

🔴 #445 Siglent 0:16:46

🔴 #445 Siglent EasyPower Remote Software on SPD1168X Power Supply

Siglent SPD3303X, hot 0:12:52

Siglent SPD3303X, hot bridge, hot regulators, modification for long life time

Siglent spd3303d ch1 0:00:53

Siglent spd3303d ch1 fail

Siglent SPD3303X Logic 0:02:14

Siglent SPD3303X Logic Analyzer trigger levels

Owon Power Supply 0:01:09

Owon Power Supply ODP3031 Firmware Bug

Tips & Tricks 0:15:17

Tips & Tricks On Using A Power Supply In Electronics Repair

Siglent SPD 3303XE 0:13:45

Siglent SPD 3303XE Power Supply Unboxing and Quick Test

Siglent Power Supply 0:07:02

Siglent Power Supply Design Load Step Response with a DC Electronic Load

Siglent SPD3303X-E cz.2 0:14:48

Siglent SPD3303X-E cz.2

New Lab Power 0:34:51

New Lab Power Supply

Комментарии
Автор

Hello, if it was after the fw update and before it the source was working normally, there was an incorrect activation of OCP, which the source can do after the update. When switching from CV to CC mode, the voltage is only reduced and the source continues to work. When OCP is activated, the output is turned off and a reset is needed using ON/OFF, in your case it was probably stuck somehow and PWR OFF was needed. OCP mode is activated by holding down the right arrow button, if you have problems with dropouts, turn on OCP, set the range A to max and turn off OCP, the source will work normally.

Nice day 😁 Tom

Edisson.
Автор

Hi . Does the SPD3303X Firmware_V1.01.01.03.10 (Release Date 09.02.22 ) solved this ?

gerykis