How to Easily Unclog Your Bambu Lab 3D Printer Nozzle: A Step-by-Step Guide

If you're a 3D printing enthusiast, you know how frustrating it can be when your printer nozzle becomes clogged. But don't worry - with this step-by-step tutorial video, you'll learn how to quickly and easily unclog your Bambu Lab 3D printer nozzle. We'll guide you through the process with clear instructions and helpful visuals, so you can get back to printing in no time. Whether you're a beginner or an experienced 3D printer user, this tutorial is perfect for troubleshooting a clogged nozzle. So grab your Bambu Lab printer and let's get started!

[matthatip]

Thank you for explaining without talking about your childhood

[akurenda]

I never even thought to do the manual extrude to push it through. You're a lifesaver. Thanks!

[DEric]

thank you for the short video. too many videos on this platform having 8 min long intros and 2 min long solutions. my nozzle wasn't even clogged, i simply watched because it was concise and i learned something.

[komradkyle]

I should have come to you first. Everyone was saying take apart the AMS, look at the Filament sensor, do a hot extrude but they never mentioned putting the filament directly in the without the AMS to clear it. It worked. Jesus you saved me I wasted a week damaging the plastic trying to pry everything else apart. Props to you.

[DockLobstah]

Best video by far! Easily unclogged without any disassembly - THANK YOU!

[Engineerboy]

Excellent !!! Perfect, short, sweet, to the point, and packed with information! Thank you.

[FadiDagher]

Thank you for this video. You just saved me after few hours of the printer not printing anything

[TheHandlebarGamer]

best and most direct video for this i've ever seen. great stuff.

[SpicyDodo]

To the point. No wasting time. Everything I needed to know about clogs in a few minutes

[PhillipStephenson-dmis]

Was loosing hope til we got to method 3. Thanks for the help!

[PaulBohn]

Thanks for explaining that. It was still plugged after doing both these procedures, so I heated up a guitar string (0.011") and shoved it in the end of the nozzle and that was enough to remove the blockage.

[mikeboehk]

Wow - that hex key trick was like magic!! I spent 30 minutes trying to get a clog out and no progress - then heated the hex key, let it cool then pulled the filament out easily. Thank you so much!!

[alirzaerdem]

That guide works like a charm.Not only how to tinker those printers but it includes great solutions. Amazing

[fausch]

all how-to videos should be like this, thank you!

[Vormulac]

Been printing with my X1C for nearly a year now - just got my first clog. This video is perfect.

[climbercal]

Just cleared my 1st nozzle clog with this vid. It was so easy Brilliant!

[PerfectPudding]

Thank you - saved my ass with your tips. I ended up heating a 1.5mm hex key, pushing it into the hotend from above slightly, then letting it cool down and "set."

This allowed me to pull the clog out from the top.

Life saver!

[SnooksBasedGodd]

unscrewed the nozzle, heated up that little hex thang with a torch, shoved it right through and now we're back in business!!! Thank you infinitely!!!! THANK SO MUCH!

[karlmadsen]

Good. No wasted blah blah blah. Information with visuals. Well done.

[BCHAN]

Just had a clogged nozzle on my bambu a1 and tried literally the first step you talked about and it worked! Thank you!