How To Install Raceland Chevy Cobalt Coilovers

[Cjmm]

It’s a good idea to put adjustable end links after installing coilovers. Especially if you’re going to go low low.

[midnightls]

I’m having troubles with the front coilovers. When ever I turn my car on a slow speed the spring spins and makes ugly noise like the spring isn’t spinning properly

[bgbeast]

I've installed everything correct on the front and everytime I hit a bump small or large it sounds like the strut is smacking the top mount. Did I over tighten or not tighten enough the nut on top of the shock? I'd say there about 1/2in of threads past the nut.

[FERNANDINO]

What's the difference between the ultimo and the basic red ones?

[VRT]

Are we using the factory rear top mount for the rear springs

[PonysGarage]

On the top nut where the factory strut mount goes back on, when tightening it down is there a specific torque or just tighten it with an air gun? Thanks!

[Jay-enbc]

when tightening the strut mounts, should they bottom out on the top of the piston or no ?

[VRT]

What do I do if my tie rod doesn’t fit the new coilover

[VRT]

MOOG K6203-2 Coil Spring Insulator

If your rear Coil Spring Insulator was blown like mines (For your rear wheels)

[javierchavez]

What do you do to the rear spring after putting the shock

[nathangames]

What coil overs are these ones?? Can you send a link

[adriangarza]

Is this the same for the sedan base models?

[PETERDUDZIAKK]

Do the ultimos fit the same way? On your website the picture is missing the rear spring and perch

[javierchavez]

Mine coil spin while tighting the top nut before mounting them

[nycjon]

I cannot get the sway bar end link to go more up should I have taken both front tires off and unbolt both end links ?