Ziegler Nichols PID Tuning Method Using Simulink

_This video demonstrates how to design a PID controller Using Ziegler Nichol's method and Simulink._

_*contacts:*_

_Instagram_

[alongkotphoosangad]

I maybe say like these, Advantage of it is easy to be used and final value is satisfied, Disadvantage of it is so waste time to find kpu which does y(t) oscillate and still stable, then obtaining ultimate kpu and use it to find kp ki kd but output y(t) with PID Gain from here is high overshoot, however I like your demonstration, thank

[sanju]

What is the use of ziegler nicholes method, when we have to change the Kp, Ki, Kd values by ourselves for the desired output?

[WakuWakuUnboxing]

hye, how to make the ziegler nicholas close loops method? for pid controller ?

[usmanagani]

sir, how can we apply to control the induction machine 3 phase?

[shishirpatil]

While getting sustained oscillations the waveform is in negative axis what conditions need to put get in positive axis

[amniaalhammadi]

What if I do the same and I get a response that has only one peak and it then stabilize? Is this meet the expectation of the PI response?

[WakuWakuUnboxing]

Hye, is the consider value 20/(s^3+15s^2+10s) the standard design value derived by Ziegler and nichols for estimating PID controller parameters?

[gabrielgelencser]

Hello! Ziegler-Nichols tuning can we use P/PI/PD?

[stephanelliott]

do the have the rest of this video? Or can you just add the rest of the tuning notes in the comments?

[surajshewale]

How do we select transfer function of any system?

[zenianggara]

Sir, where did you get the values 0.6, 0.5 and 0.125 ?

[souravde]

Please use audio in your video. Otherwise it's seems to be monotonous.

[hakandaglagan]

Is there any other method to find K_critical rather than trial?

[shishirpatil]

what amount of step value have you given sir