3 phase motor running without phase||

preview_player
Показать описание
3 phase motor running without phase,
#3phasemotor
Рекомендации по теме
Комментарии
Автор

Fit an MPCB or MPS (motor protection circuit breaker) in place of the Circuit Breaker to detect the missing phase and protect your motor from burning out

jester-lester
Автор

the important of education (instead of showing not correct infomation)

scienceguide
Автор

harus menggunakan kontaktor dan overload protection. Agar bila kabel putus satu, motor langsung mati dan aman

sambady
Автор

Wrong if you cut one wire it will continue to work. It Won't start from no rotation. A rotary phase converter actually starts with three wires and then operates on two amd creating the third leg off the previously started wire

michaelidarecis
Автор

This phenomena is called single phasing and motor will still run if the load is half or less than half

DHEERAJ_KUMAR
Автор

नो लोड पर दो फेस में मोटर चलती रहेगी लंबे समय तक कोई प्रॉब्लम नहीं होगी
और जो फेस निकला है उसे टर्मिनल पर मोटर हमें फेस बनाकर भी देगी उसका उपयोग दो फेस सप्लाई पर थ्री फेस मोटर चलाने के लिए हम आसानी से कर सकते हैं और उस फेस के द्वारा दूसरी मोटर को फुल लोड पर चलाया जा सकता है

shivramhajare
Автор

It continues to work and doesn't burn like this at all.

shajdivakaran
Автор

Open class Delta configurations will allow rhe motor to continue running until it burns up. This is why most processing plants use ungrounded open Delta transformers.

yapandasoftware
Автор

Bhutni ke current ka Aadhar card ke motor chalegi

vinodgupta-giun
Автор

The motor is delta connected. Even with a minimal load the motor will stop. If the motor is star connected (with neutral) then it can run on 2 fase even with a decent load. For all of those writing that the delta connected motor will run on a 2 fase please open any electrical machinery book and then come back and correct there comments.

rsaj-cqne
Автор

This is wrong in rotation the coil doesn't fail.on startup only fail .

aravindhr
Автор

Colocar un protector térmico, regularlo a la intensidad, que ponga la placa de características del motor, así protegemos las bobinas.

royer
Автор

Btw thats how they discovered how to make a one phase ac motor. They realised that if a 3 phase motor is spinning and one phase is disconnected, it will continue to spin. If you try to start it with 2 phases it wont work because instead of a circulating magnetic field, it now has an alternating magnetic field, which does not create current in the rotor and therefore it doesn't spin

dionsyran
Автор

This. Intended for three phase but if you cut one Line its Suddenly Stop
Offcourse
Now the motor still have a current now cannot rotate
What happen the Field Windinghave Current Forcing. To Rotate the Armature but stock up magnetizing the cause of Smoke donnt OVER LOAD PROTECTION OR RELAY 😮

dznvkbj
Автор

No, the motor still running with 1/3 power, but with the load heavy than that, It will stop and burning.

ibmiequ
Автор

Eso es arranque estrella, con un Guarda motor se protege el motor para q no se queme y más cuando le falte una fase

Jose-qzxm
Автор

Had a motor loose a phase last week, We only noticed because the conveyor was running slower than the rest.

dogwalker
Автор

Pra isso tem ter um sensor de falta de fase pra desligar tudo na falta de uma.

luispaulopires
Автор

Motor tersebut systim nya hubungan segita bukan bintang dia akan terbakar lilitan bila satu fhase tak bertegangan dikarenakan cara kerja fungsi magnid nya hanya 2/3 tidak seimbang

evjviei
Автор

use phase failure relay and prevent the burning winding of 3 phase motor

darkmalayalam