PSC 3 Wire Outdoor Fan Motor With a Universal Motor

[randallsimmons]

Thanks for the lesson, helped me wire a new 4-wire to my existing 3-wire. Only negative is on the company as the outlet here in Fredericksburg no longer sells to the general population, had to get the motor from your competitor.

[Ryanmcmxc]

Thank you for this video, I watched this to get me through a motor replacement on a rooftop to today!!

[randytorboli]

I just had one of these motors installed on my MILLER package ac unit and it was the 1/4 horsepower 1075 rpm motor and it replaced a 1/8 horsepower 1100 rpm motor and so far it's working great

[azclaimjumper]

I printed out the 3 wire schematics to have in front of me when out by the A/C. My a/c has a 4 wire motor & separate capacitor which I'm now planning to change. will do away with the separate fan capacitor.
FIRST, I need to be sure the dual run capacitor, the fan side is the same uF as the fan motor which may have a different uF.
Warm Regards from Reno, Nevada

[pipi]

Nice and clear and easy to understand. Good Video. Thanks

[gilbertopatino]

Thank you so much for great work and video 🙏🏻👍

[demateus]

Thank, you this a great information I like by The pictures color easy to follow. Thank you/

[Mythdoesartstuff]

But sir mine also has a yellow wire
Where does this wire

[ericprowheck]

I replaced a 3 wire with a 5 wire. I hooked up everything as it was and as this video says except I have a brown/white and a red (low) wire nutted. It didnt work, but as i messed with it the red wire grounded out (wire nut was off) and the fan kicked on. I feel like I'm so close, any ideas?

[jasonlozano]

What happens if your wire the white and brown-white to common?

[alpeshpatel]

I have 5 wire on new motor and old motor has 3 how can I connect right way

[davidarmour]

Thank you for the schematic. They don’t come in the instructions anymore these days.

[dayweekend]

black wire is t2, i believe you said t1

[Funkngemini]

I wired it with 4 wires but my fan doesn’t stay on 😢

[ludwig]

"Opposite side ...T1"....? your diagram shows T2