All 4 LED Blinkers on? FAST FIX HERE! For Motorcycles - fast blinking / all 4 lights on XL600R

On Amazon:

~~~~~Help Support the Channel Below~~~~~

*I get a small commission on any purchases made through the Amazon affiliate links on this page. Doesn't cost you any extra and helps me to continue producing content. Thanks!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Other AWESOME Channels You Should Check Out:

[lovetofishneosheo]

Best video the YouTube university has to offer

[HB-yqgy]

Thank you so much! I was so confused watching all the different videos your diagram was simple.
You're the only one who explains quickly how the indicator lights are wired to the diode. My problem is I have running lights 3 wires. My guess is to find the ones for the blinkers? However, all LEDs are in & new relay but, the rear signal lights doesn't work only with incandescent.

[larisaidis]

I was searching on YouTube as of how to make my rear LED turn signals indicators work and I bumped in to your video and I watched it. I have a motorcycle and I have a doggie, and the best part of this video is at the 2:07 mark "get out of here dog" and then at the 2:11 mark "you such a god boy, yeah"😂😂😂😂😂😂 and you made my day😂😂😂😂

[tcepilot]

I used the flasher in the link and it works great! I just took the bulb out of the dash and good to go

[brandyquad]

Best video I found. Straight to the point. I like it. Just finished this up on my 92 fzr 600. Made my own diode deal, though. Didn't want to deal with waiting for shipping to Alaska.

[jaybourbon]

Your link to the Amazon diode brings me to the main page. Can you please send a link to the exact parts? Thank you.

[docjody]

Wow, thanks. Yes, I installed all 4 LED Turn Signals. No Hyper-Flash, but now I've got the 4-Way Flashing ("hazard Flashers) you mentioned To fix, do I need 4 Resistor kits (one at each turn signal)? Or, how many to install?

[troylatchford]

Did u cut the blue wire to make it ground or leave it in place just made it a ground while still intact to factory wire harness

[shanehopkinstheog]

Can you just cut one of the live wires to the turn signal indicator if you don't care about having a little indicator light? Would that fix the issue?

[kirk]

Thanks heaps, saved me a lot of time sorting a dr600, made my own diode wire, relay plugged up to harness, excellent video, glad its still on here, cheers,

[UKEnduro]

Just wondering if you can change the dash bulb to a LED bulb? It's a diode after all and will stop the currant passing through the ground cable. Gona try this later. Thanks for the vid. As soon as I took the dash bulb out they all worked fine with the correct relay

[disguisedpickle]

Installed a “no cut diode” kit and wired in led relay the issue was gone with my leds I swapped my front leds to mirrors+leds and have a 4way blink now worth mentioning I didn’t have the diode installed until after I swapped to mirror leds

[brianmeyer]

Did you have to change out the indicator turnsignal bulb to an LED or can you use the icandescent bulb in the guage cluster? Please Advise. Thanks

[dan]

I had same problem. Thought I'd remove indicator bulbs, then nothing worked lol. Ordering the mentioned kit

[evdath]

It worked for my 1985 honda XL350. Thank you, very much!

[sickssix]

JUST SWITCH THE FLASHER UNIT FOR A LED ADJUSTABLE ONE, EBAY/AMAZON $5
FORGET TRACKING WIRES AND TESTING, ITS A PLUG AND PLAY UNIT AND ITS ADJUSTABLE SO NO MATTER WHAT YOUR NEW LED INDICATORS ARE AMPED AT THE UNIT WILL SET THEM TO BLINK AT TH RIGHT SPEED, ITS A TWO MINUTE JOB.

[widowdev]

Does it matter which wire from the turn signal indicator dash bulb that you ground? I'm guessing I need to get the flasher aswell as the diode since right now if I turn on the left or right signals, all four stay on steady..

[trevortrevortsr]

Amazing - I thought I'd cross wired it somehow - it lit up like a chrismas tree - right now I can get it sorted

[masonduncan]

if i wired up new lex turn signals on all four corners do i need a kit for the front and one for the back or just one?

[EazysJourney]

Do you only have to wire one turn signal on the front and back? Or do you have to wire this up to every single turn signal? Thanks!