We ditch the Composite Gen 3 Coyote Oil Pan and replace it with the earlier Steel Pan

In this video Frank Perdomo from PBH Performance introduces you to a new kit from PBH. The ACC-131 is a complete Gen 1/2 Steel Oil pan kit designed to be used on your Gen 3 Coyote engine. The Gen 3 engines have a composite pan that takes up even more room and is hard to modify to fit. The earlier gen 1/2 is made of steel and has a smaller footprint.

PBH walks you through the contents of the kit and how to perform the conversion to your own engine.

Kit Intro and Components 2:26
Tools Needed 3:24
Step by Step Instructions 4:38

[PowerByTheHourPerformance]

Thank you for watching, if you have any questions about this product or anything related to it please post it up. We will be here to answer them and help you with your Coyote powered build.

[allancooper]

Thx for all the precise info in fitting all these parts and products !!!

[glenndiorio]

Nice step by step. Not the usual, "just put it on, tighten it down, and you're good to go" sequence. :) btw: just got my Coyote swap vehicle to grab stuff from, now the fun begins!

[ofRTR]

Clean and simple the way I like it 🤙 🇺🇸

[thereissomecoolstuff]

That was great Frank. I'm seeing my oil temps getting hot with spirited driving. Will having 2 less quarts make it worse? 8 quarts seems like plenty of oil. Especially buying motorcraft 5w50 synthetic. Any thoughts or is this just for drag racers who like to bounce the car on the oil pan.

[Patmansprcrw]

Will you sell the pickup tube and hardware separately so I can run my own oil pan on the Gen3?

[astrorota]

Hi Frank, Would this sump be an upgrade for track days?, ie: do you think it would keep oil around the pick up more effectively than the gen3 Pan ?

[waynescott]

I have gen 1 5.0 in my 2014 f150. My oil pan gasket is leaking. Online I find a gasket with the windage tray all in one piece and just the plain gasket. Does it matter which one I use?

[FordsRule]

Ok so after doing this conversion back to the gen 1/2 pan will this now fit into a fox body? specifically with a MMKM-2.1 k-member?

[MTAGJJ]

At this point of doing this upgrade can I use a upgraded gen 2 oil pan?

[StillNoPickles]

There’s no way you got 89 inch pounds on those oil pan bolts. They just spin in the block…