Removing Car dent with Boiling water and a plunger! DIY

Показать описание

Showing how to remove a dent with boiling water and a plunger. Remember that not all dents are the same and some are not going to come out this way! Mine still had a little deep one at the end of the day. Doesn’t hurt to try though!

Jose Baez

Рекомендации по теме

Комментарии

Hey guys if y’all have the chance to subscribe to my girls page that’ll be dope. She just started a vlog channel so tell all your girls to visit her channel and share. Appreciate y’all ——> Priscilla Analiese 🔥💪🏽

josebaez

"be careful not to burn yourself" says the guy in shorts, tank top and sliders 😂

motorizedpower

Yes this does work and is not only done on plastic. The hot water isn't to make a seal for the plunger it's to make the paint soft so it doesn't crack along the creases of the dent . It's easier to flat and polish clear coat than it is to repaint a whole door because the paint cracked and came off in one chunk.

jayhow

Always wear slippers and shorts when boiling water in the area. Please remember.

dontdoit

He looked round to make sure no neighbors were seeing him look like a tweaker with a pot and plunger 😂😂

michaelspeer

Remember it can't be boiling too hot😂

chenzostanley

Boiling water is one temperature, it can't be hotter unless pressurised or colder then it's not boiling. Unless at higher altitude pressures. Genius Man.

gnetmail

Now we just buff out all these poop skid marks from the plunger and were done!!

kodiak

Thank you much for this video. I have a small dent on the drivers side of my door (2017 Toyota Corolla) I pulled up at the gas station opened my door and hit the "U” shaped barrier next to the gas pump. I’m happy I viewed your video. Guy was asking me for 50.00 to repair this minor dent.
I’ll show my son your video, have him do it for me. Again, Thank you! 🙏🏽 Unlike some trolls here making fun of you. They have no respect. Me - I appreciate your video. 👍😎

ms.c

I knew a guy who worked at a car dealership way back in the day, and said they used the old plunger trick then too. Said it worked like a charm.

LateNightCable

Should my water be a low boiling, medium boiling or high boiling? Thank you... 🤣

-MightyMouse-

Someone doesn't understand what "boiling water" means

windsofchangefarm

Plot twist : that's how they do it in the workshops and charge us hundreds of bucks 😶

kaustubhpaul

Proceeds to dent tf out of the door pushing the plunger hahahahaha

davek

It doesn't have to be boiling water, water from a hose will work just as well. The water is just to help the plunger seal better. Also a sink (red rubber one) plunger works better. I've done without any water at all before.

jamietyree