FORD 6R80 TORQUE CONVERTER INSTALL

This F150 had a slipping torque converter clutch causing shudder under load and fluctuating rpm's.

[richceglinski]

I love your detail orientated work practices. I do that too to strive for zero comebacks for workmanship. Things like assembly goo on front seal, atf on converter snout. I thought I was the only one to lube the rear of the crankshaft so the converter glides up square flush and centered so it won't vibrate. Good work

[frankwrenchman]

Love to have seen the after repairs patern on the scope

[phooesnax]

Great video. Does the bad one feel like a slight surge?

[harrymontanez]

Hello, watching this video, after the torque converter is in the transmission and you are installing it to the engine, how do you access the torque converter to install the 4 nuts?

[ramirez]

Replaced the flexplate and about to install transmission, but new flexplate does not have orange alignment mark like original. What should I do? As always thanks for the information shared.

[bigben]

Do you have a link for the seal installation tool

[jonahcruz]

So I think I’m having an issue getting the converter all the way in. Probably spent a good chunk of time twisting and spinning lol. I noticed you used the level to check. When you set the level against the trans and converter is it flush? When I checked my converter using this method my converter snout was flat with the bell of the transmission, but I was having Flexplate to converter clearance issues. I was wondering if I need to hear it click again?

[mnrejaj]

Do you fill the torque converter with any type of fluid before installing it?

[ramirez]

Thanks for the video. Are you dry installing or do you put fluid in the torque converter before installation?

[nicklarson]

The studs are for a guide only into the flywheel or do they bolt on?

[jackn]

Did the transmission jack leave any dents on the trans pan?

[josemonjaras]

hey man so im working on my 13 f150 ecoboost, would you happen to have the fill procedure for after installing the transmission? im having trouble finding the proper sources showing the proper procedure and im wanting to make sure its done right.

[adamwinters]

Does the torq converter have a marked clock position to the crank.. or just bolt it together??? Thank you for this video.. you saved me a ton of problems

[Kayy_SS]

Oh boy, its a major repair then. I am looking to buy a used 2010 Fusion, the owner said "there is a torque converter shutter that occurs occasionally when driving 60+ in overdrive", is that something that would require a torque converter replacement? Thanks

[mateotavares]

Do you torque down the torque converter nuts through the starter hole ?

[gerardomendoza]

Have a question hopefully you can help me with it
I have a 2010 f150 5.4 it has the 6r80 im wondering if the torque converter from a 5.0 f150 6r80 will fit in the 2010 f150 6r80

[peterpan]

And where did you get the tool for the seal

[ronaldnunez-imrj]

How much the price torque converter ford expidition 2018 model

[donaldisrael]

Is torque converter installation depth an issue?

[peterpan]

Where did you get the torque converter