Most Easy Way To Cut Vinyl Lattice Panels

This is the easiest way to cut vinyl lattice that I've come across and I wanted to share it with you.

I had to replace a couple vinyl lattice sections that were blown away from a hurricane. The vinyl lattice needed to be cut to size. I show you how I did it. In the past I have tried other ways to cut vinyl lattice and something would end up going wrong. For example I've used a circular saw and the vinyl would chip or crack so I found a better foolproof way to cut the vinyl.

Tools used:

My new current power tool set 20V Dewalt Combo Kit:

Links above contain affiliate links. If you click a link and make a purchase, we will make a small commission. This won't cost you more $ but will help support the channel and we appreciate you doing so.

[jimkeown]

Great video! One thing I could add is to mention is that vinyl lattice expands and contracts quite a bit on larger panels with temperature changes so be sure to allow a bit of space for these size changes especially pre drill holes for the screws larger than the screws used and cut the panels slightly shorter than measured or you will see the panels bowing quite a bit in the hot summers.

[clemclemson]

this was a huge help - used your ideas today - worked awesome with the multi too w/round blade like that. THANK YOU

[orens]

Circular saw with a finishing blade works very well too and is much much faster.
I've used the circular saw hundreds of times without any issues

[selenebelle-oudry]

Thanks for this video! The oscillating tool worked perfectly for me to cut lattice for my porch enclosure. Much appreciated!

[martyvictor]

Five minutes of your video set me up perfect. Thank you

[NaturalBornRebel]

The best way to cut any vinyl product is with a circular saw with a fine tooth blade turned backwards. That's how I cut all my vinyl siding with a cutting table. That is if your doing long straight cuts of coarse. That being said, i love those oscillating saws, lets you do work and get into places no other saw can. Good job

[ehRalph]

Good tips, maybe alumnus or stainless gutter screws will work. I’m heading out today to fix a lattice with no idea what it’s really going to look like until I get there. I have an oscillating tool, so definitely bringing it along

[pearlperlitavenegas]

Thank I love my multitool & avoid using my circular saw at all costs😂this was perfect!

[bonniedavis]

Cool I love my oscillating tool. So many uses & it's easy to use.

[Kiskassklan]

Good video. I used a plywood blade on my circular saw for that years ago. It seemed to work good with the small teeth.

[susanduryea]

Thanks for sharing, I hadn’t thought of using my multi tool.

[darlenemendenhall]

Awesome video
You did a good job explaining things. Thank you 😊

[houstonsheltonbees]

Great job and tips.👍 You can also turn your circle saw blade around backwards and cut it without problems. It works on plastic siding also. Thanks new subscriber liked 👍 hello from Kentucky mountains USA

[JASONBORNE]

Great Job Bro!!! Know I know how to do it myself!!! I didn't think about how good you can make that channel secures it or makes it looks so crisp like ha. Now I have to change my plans to do it the right way but thank you for your vid man!!

[heatherburns]

very helpful...we have been struggling with skill saw...melting the vinyl...

[motorspice]

Hey good job but I used my hedge/branch cutters. Easy peasy! Not power operated, just hand power and was as simple as 1-2-3. I’m 61 and my long branch cutters, Bypass pruners!

[valerieunderhill]

I am intending to cut it with a jigsaw

[brucehampton]

Nice video but Im on here for cutting vinyl lattice only not the whole project but thank you.

[amyjolly]

Do you know of a staple gun that will go into the vinyl lattice?
I want to attach a screen

[neldarubio]

super helpful!! thank you for sharing!