10 MUST HAVE 3D Printing Tools

I've put together 10 MUST HAVE 3D printing tools that every novice or expert should have in their 3D printer tool kit!

Having the right tools at the right time in any hobby is important. 3D printers and filament can be expensive, and succeeding as much as possible is important so we don't waste these precious resources. These tips, tricks, hacks and tools will help you get the most out of your 3D printing passion, and help keep it fun and maybe even profitable!

The following links are Amazon associate links, where we may receive compensation for your purchases through our links, your cost stays the same! Thank you for helping support our content!

1: Dremel Butane Torch
$54.11

2: Glass IPA Spray Bottle - 2 pack
$19.98

3: Micro fiber cloths - 50 pack
$12.99

4: Deburring tool - 30 blades - 3 different blade styles
$29.95

5: Purple Glue Stick - 60 count
$13.57

6: 8 piece plier set
$32.99

7: 17 piece file set
$23.39

8: Super Lube Silicone Grease - 3 ounce
$13.92

9: 0.4mm nozzle needle kit
$12.99

10: 4 piece Hex screwdrivers in 1.5, 2, 2.5 and 3mm
$16.50

Timestamps
00:00 Intro
00:17 Butane Torch
01:34 IPA Bottle
02:23 Microfiber Cloth
03:18 Deburring Tool
04:11 Glue Stick
06:05 Plier Set
06:53 File Set
08:08 Super Lube
09:08 Nozzle Cleaning Kit
10:13 Hex Screwdrivers

Thank you to AdditiveRecreation for the beautiful 3D print of Red, our Red Fox lab that passed recently. 💜

#3DPrinting #tools #3DPrinter

[jbrou]

I never would have thought of using a deburring tool to clean up the edges. That's a great idea.
My feelings on the glue stick - when in doubt, whip it out. Can't hurt and it's easy clean up. I use warm soapy water on my flex plate for cleanup.
You have such a positive attitude that I assumed you would say the Super Lube was half full.😉
And what's wrong with your dog? He hasn't moved during the whole video.
Again, thanks for the helpful tips.

[larryaz]

One tool I tend to use every time I use my printer is a set of digital calipers. Of course I draw what I need in CAD so being able to accurately measure my target object is necessary for me. Thanks for the video!

[theangryotaku]

In regards to build plate cleaning, I've found you dont really need IPA at all. 99% of the time just scrubbing for ~30 seconds under some warm water with a couple drops of dish soap does the job beautifully. The process is almost identical to cleaning your dishes, just gotta make sure to not touch the build plate with your bare hands very much

[thinkcre]

The hobby torch I found at Harbor Freight for $12 .... a couple years ago . I use it all the time and it still works. Update: I just looked it up right now . It's called butane micro torch . $14.99

[lmaoroflcopter]

Micrometer, caliper, ruler, protractor, feeler gauges.

If you're making functional prints, these things are a must for measuring stuff.

[kaycerayce]

One I would definitely add is a ratcheting screwdriver with a set of hex drivers. For ~$12 at Home Depot, a good ratcheting screwdriver should be in EVERYONE'S tool box, and adding a set of hex drivers makes working on 3D printers a breeze. I have a few ratcheting screwdrivers in my tool collection that I use on everything from putting furniture together, to putting up artwork, to working on 3D printers. They're invaluable!

[ashhillmodels]

I found out, when you're using gluesticks, save your IPA and just wash your buildplate with warm water and dishsoap. Works pefectly fine and saves money.

[nannerstout]

A Noclogger tool saved my life with my Ender 3 V2 with pushing out clogged filament through the hotend and nozzle while I was learning. I still pull it out to make sure everything is running clean and smooth. Highly recommend

[oba_kinbo]

I have everything on your list, I’d add digital callipers, a paint brush for dusting away around the printer every so often, and blue 3m painters tape instead of glue stick.

[jeffl]

A good trick for glue stick is to wipe it away with IPA after applying. It looks like you wiped it all away, but the surface will still be slightly tacky. You can even see the glue is still there by running the build plate under hot water and watching the purple from the glue reappear. This way, I get the best adhesion, and it never leaves glue residue on the bottom of my prints.

[boodaahd]

I would add plastic razor blade scraper. And depending on what adhesive you use on prints, either (disposable) wooden coffee stirrers or (reusable) silicone glue brushes.

[briani]

yall are out here using glue stick and saying purists dont use anything. true OGs out here still using kapton tape.

[demonicmind]

A couple of things i like to keep handy are spare nozzles, xacto set, and tweezer set. Great video, wish it was around when i started 3 years ago, haha.

[lolslim]

Another thing I wanted to share, you can apply purple glue stick to the top of supports change your slicer settings where there isn't any z off set between the support and model, the underside will be great, and support will pop right off.

[NessieKnows]

As I just started in this 3D journey this is awesome to watch and making a shopping list.

[FoxHoundUnit]

I got some great plastic spudgers from Harbor Freight a while back when I was detailing cars. They're great for removing trim inside a vehicle without damaging it, but they're also great for popping supports off without destroying prints!

[josephpk]

Every tip in this video is spot-on. I must get a set of long shafted hex drivers. I made the mistake of buying a multi-bit version, but the bit housing gets in the way in tight areas. Also, violin scraper blades were suggested to me by another channel and I sourced some on Etsy - the only place I found them - and they are awesome. They come in a wide range of shapes, so they fit anywhere and they are more accurate and versatile than sandpaper. No more selecting grits - more pressure = more material removed. No more removing sanding scratches - they leave a near perfect finish. Subscribed.

[svenpetersen]

I am using a hand drill, which is actually a screwdriver handle with a chuck to hold drill bits, to get holes to the required measure. Usually, the holes in a 3D print are too tight or side holes are oval instead of round or there are supports, that need to be removed, the hand drill does a better job than a dremel or battery powered drill, because it is more sensitive.

[StepanChizhov]

I've been using 3d-printers since 2016, and I have never considered using a deburring tool! Thanks for that! Ordered myself a set =)

[JohnFraser]

Love the Napster shirt and thank you for all you do