You Need This Sander - AirCat 6-inch Random Orbital Sander [WITH VAC]

Показать описание

The AirCat 6700 6-inch Random Orbital is a great start to becoming dust free in your shop. With the central vac model, you get a dust extraction port that removes almost all of the particulate the Aircat sander is removing from the surface.

The dust extractor or vacuum that will be attached to the Aircat will pull the residual through the holes in the sanding disc, through the Aircat sander pad, through the dust port, and finally into the vacuum or dust extractor.
#bestorbitalsander #dasander #orbitalsander

Keep current with our great content:

Рекомендации по теме

Комментарии

Having an air compressor in the workshop is a game changer.

lyndonmortimer

Wow, I'll bet a lot of body shop guys will love this tool!!!

PowerStrokeJude

Where you mentioned vibrations I can tell you if you were to change pads you can also cause unwanted vibrations so buy the one with the correct pad form the start or buy a factory brand pad if you do need to change it. I found this out by swapping the pad on my ingersol rand to a work supplied pad to a hook and loop and it eventually vibrated to paddle pin out and parts flew and it was dead at that point. So at that point I dismissed it as a bad tool not realizing the pad was at fault. I then bought a dynabrade black supreme and swapped to the same work provided pad. Again the same vibration like it was out of balance and again it would vibrate the cross pin out. So I decided to order another dynabrade cross pin and ordered a dynabrade brand hook and loop pad and the problem stopped. That DA runs so much smoother with the factory pad. I don’t know exactly what the issue is but there is definitely something different with the weight or the balancing on the pads. I do know my work provided pad is a little thicker so idk if that’s just making it heavier possibly but I’d definitely recommend buying the correct setup to start with and save yourself a lot of headache and avoid a vibrating sander.

whatfreedom

I've got 1-1/4" duct tape adapters if anyone needs to connect their vacuum hose to it...i'm guessing everyone already has the duct tape adapter.

bigwrenchgarage

LOL I'm just wanting to sand down rock chips so I can lay vinyl wrap on the great info for future

JQUICK

I am a wood worker with a small hobbit shop, but I am leaning toward air over electric. thanks for a great video

jeffreysykes

ridgid shop vac also has multi stage filtration

walkingconifer

I like the air attachments, where do I find those. The 1/4 inch air attachment from the air hose and is that an in line air regulated? It just looks like a great set up.

richardmanikowski

Never used one but it has a lower vibration rating than the bluepoint sander.

whatfreedom

I really want an air cat. My snapon has a 3/16” orbit as well but the damn air control is in the way of my fingers half the time.

zakprice

thanks for the vid, I'm a woodworker looking into getting a sander like this, how much do they cost?

renobtankit

Been dicking about with wet-sanding as opposed to D.A dry sanding the last while. Half the world uses D.A sanders - the other half use wet sanding by hand. I tried wet-sanding as I work daily with an African dude who is used to "African ways" as opposed to our "spoilt" ways.

Surprisingly. I now know why the other half of the world wet-sands by hand. Because it is about three times as good & 10 times as economical as dry power sanding. On everything. Even stuff you'd never dream of wet sanding usually.

jamesward

What size air compressor is recommended 20lbs?

redbaron

Hi There! Where do you purchase your yellow textured nitrile gloves from? Are they good quality? Please share a link if you have! Cheers, James

TheJamieShow