How to bleed your brakes by yourself ( how to gravity bleed your brakes) all vehicles.

how to bleed automotive brakes.
How to gravity bleed your brakes.
Bleeding your brakes.
How to bleed your brakes.
How to bleed car brakes.
Bleed brakes.
How to bleed the brakes on a Chevy.
How to bleed the brakes on a Ford.
How to bleed the brakes on a Dodge.
How to bleed the brakes on a Pontiac.
How to bleed the brakes on a BMW.
How to bleed the brakes on a Mercedes.
How to bleed the brakes on a jeep.
How to bleed the brakes on a Honda.
How to bleed the brakes on an Acura.
How to bleed the brakes on a Subaru.
How to bleed your brakes by yourself.
how to gravity bleed your brakes
all vehicles brake bleeding.

Disclaimer: this works in some vehicles but not all vehicles, this only works if working on one wheel at a time, don't do what I do, don't listen to me, I am not a professional, everything I do is for entertainment only.

[markymark]

For most cars, especially higher mileage cars, you don’t want to push the pedal all the way to the floor. Only about halfway down is necessary, but no further than how far the pedal normally travels. This is because the piston in the master cylinder only typically travels within the normal range; when you open your bleeders, the lack of pressure will allow your pedal to be pushed to the floor much easier, which will cause the piston to go further forward than usual. That further region will not be as smooth and may have imperfections, because the piston rarely travels there. Therefore, pushing it too far can cause your piston to go into the “imperfect” region and damage the seals of the piston.

[robertclymer]

I only gravity bleed my cylinders now. Works great and no air. Just tend that reservoir and keep it from going dry!!!! Also, I use a clear hose too, you can see any air bubbles, and brake fluid will ruin paint so it helps direct it into a bottle or container.

[FordTransitvan]

Great video, always get a dad to help if you're lucky enough to have him around even if you don't need him. Cherish him even if he's not required in this case, or you're not required to bleed his brakes.

[JacobBerry-lobm]

Good job bud! You had me cracking up at the end. All them times your dad made you come out to the garage and make you help when it was all a lie😂. Appreciate the tip about letting the pedal up very slowly. I think others forget to mention that one!

[thefivegeorges]

Finally! Somebody who puts it in words we all / I undastand, delivers that shit in a very interesting manner, and cuts directly to the chase without the bullshit !! 5 stars Bro !!

[Lughnerson]

Dude... Pretty decent instruction and Not a bad video. Thanks.

[AlexTorres-ke]

If u only change one caliper or have the piston pop out on the electric park break system do u have to bleed all or the one?

[iTzx]

I love your channel. We are literally doing all the same things lol these videos keep from losing my mind while I work on my e36 lol

[Kellyhagarty]

Thank you brother!! Appreciate the tips and good energy!

[robertclymer]

Love your energy and enthusiasm Brother!!! I smiled the whole video! Cheers from Motown!

[miveezee]

LOL, it was all lies! THX dude! Great video:)

[GirthosaurusRex]

This works in a pinch. You don’t need a hose, I think I used a Gatorade bottle let it squirt a little but once I got a flow going let it drip

[garciasschevy]

What size is the rubber hose? Do the tires need to be off the vehicle?

[carlloeber]

but will it work with a modern car like a Prius ..

[ronaldoquintos]

That did not work for me when I replaced caliper on 04 trailblazer. It would never bleed nipple at the too not wrong side.

[neshobanakni]

Are you closing the master cylinder while pumping?

[patscanlan]

Do you leave the cap off the master cylinder resovoir????

[livesent_kap]

Do you need the hose attached to the bleeder??

[fishmut]

Great video for bleeding your brakes, only I would have the fluid going into a bottle that ways it’s not getting wasted in a dirty container and you can’t reuse the fluid that came out.

[livesent_kap]

Or did you jus put it on so it didn’t make a mess in your shop?