Fix Diskpart has encountered an error, The parameter is incorrect on Windows (2023 updated)

Here's how to Fix Diskpart has encountered an error, The parameter is incorrect on Windows.

4/23/2023 added:

The error message "DiskPart has encountered an error: The parameter is incorrect" can occur for a variety of reasons. Here are some possible solutions:

1. **Check the spelling of the command.** Make sure that you are spelling the command correctly.
2. **Make sure that the command is valid.** Not all commands are valid in DiskPart.
3. **Check the syntax of the command.** Make sure that the command is formatted correctly.
4. **Make sure that you are using the correct parameters.** Each command has its own set of parameters. Make sure that you are using the correct parameters for the command you are trying to run.
5. **Try running the command as an administrator.** Some commands require administrator privileges to run.
6. **Restart your computer.** Sometimes, a simple restart can fix the problem.
7. **Update your drivers.** Outdated drivers can sometimes cause problems with DiskPart.
8. **Run a disk check.** A disk check can sometimes fix errors on your hard drive.
9. **Contact Microsoft support.** If you have tried all of the above steps and you are still having problems, you can contact Microsoft support for further assistance.

Here are some additional tips for troubleshooting the error message "DiskPart has encountered an error: The parameter is incorrect":

* **Use the /? switch to get help for a command.** For example, to get help for the clean command, you would type "clean /?".
* **Use the list commands to view a list of available commands.** For example, to view a list of all disk commands, you would type "list disk".
* **Use the help command to get general help for DiskPart.** For example, to get general help for DiskPart, you would type "help".

Please note that, if the error message "DiskPart has encountered an error: The parameter is incorrect" persists, even after trying all of the above solutions, then it is likely that there is a problem with your hard drive. In this case, you may need to replace your hard drive.

Before you replace your hard drive, you can try to recover any data that is important to you. You can do this by using a data recovery tool. There are a number of data recovery tools available, both free and paid.

Once you have recovered any important data, you can replace your hard drive. You can purchase a new hard drive from a computer store or online retailer.

When you install your new hard drive, you will need to reinstall your operating system and any other software that you were using. You can find instructions on how to reinstall your operating system on the manufacturer's website.

i. Diskpart is a command-line utility that can be used to manage disk drives and partitions. It can be used to create, delete, format, and extend partitions, as well as to perform other tasks such as disk cleanup and disk diagnostics.

Diskpart parameters are the switches and options that can be used to control the behavior of Diskpart. There are many different Diskpart parameters available, each of which performs a specific task.

Here are some of the most common Diskpart parameters:

* **list disk:** Lists all of the disk drives connected to the computer.
* **select disk disk number:** Selects the disk drive that you want to work with.
* **create partition primary/extended/logical size:** Creates a new partition on the selected disk drive.
* **format partition number file system cluster size:** Formats the selected partition with the specified file system and cluster size.
* **assign partition number drive letter:** Assigns a drive letter to the selected partition.
* **active partition number:** Sets the selected partition as the active partition.
* **delete partition partition number:** Deletes the selected partition.

These are just a few of the many Diskpart parameters that are available. For a complete list of Diskpart parameters, please consult the Diskpart documentation.

Here are some examples of how to use Diskpart parameters:

```
# List all of the disk drives connected to the computer
list disk

# Select the first disk drive
select disk 0

# Create a new primary partition on the first disk drive
create partition primary

# Format the new partition with the NTFS file system and a cluster size of 4K
format fs=ntfs quick

# Assign the new partition the drive letter C
assign 1 C

# Set the new partition as the active partition
active 1
```

Diskpart can be a powerful tool for managing disk drives and partitions. However, it is important to use Diskpart carefully, as incorrect commands can damage your data.

[wrestledroid]

tried all your method... still not able to format SD Card.

[arnervillahermosa]

I did all of it, but I still have the error that says: "DiskPart has encountered an error: The parameter is incorrect. See the system Event Log for more information."

[CobraArs]

Yeah even with your tip it doesn’t work. SMH