Master Pipe Saddle Tip Revealed: The Secret to Easy Fit and Welding

In this video, I’m going to be showing tips and tricks on how to saddle pipe for different diameters. You can use this for welding pole barns and fences, Hope you enjoy.

Congratulationss on starting your new welding business. If I missed somthing, I have no doubt that I will find out in the comments. Thanks for watching guys Happy welding.
Tips for welding With 6010 ,70+ or 8010 and 7018.

Just getting out of welding school Here's some advice. I hope it helps people starting their welding journey.
#Pipewelding
#pipeliner
#7018
#6010
#RigWelder
#DownhillWelding
It’s important to go to welding school but it is more important to learn how to weld. It doesn’t matter what you do just practice and keep practicing. Nobody can hold your hand. It’s up to you. American Welding Society! Welding schools!
#WeldingSchool, #RodAngle, #TulsaWeldingSchool, #LearnHowToWeld, #7018, #6010, #taylorwelding, #weldingschools

I'm not a welding inspector, a safety man, or your mom. Do your own research. I'm not responsible for anything you do. Have an awesome, awesome day. Stay safe. welding tools homemade

[PaulThomas-qovy]

I love to hear an older Pro dropping tips & shortcut ! Thanks Mr. Taylor for putting out this channel! When I get my eyes repaired, I'll get right back to throwing sparks & stainless Tig. This kind of gokd nugget content keeps my brain fresh & eager to get back to welding & building metal projects again! 👍

[mclark]

Amazing, I just learned the easy and best way to make saddles.

[MBwelding]

That’s pretty good eye balling I like that hammered tip trick I’ll have to try that

[jimskinner]

That’s the way I was shown to saddle pipe when I first started. You didn’t show it, but if the joint isn’t 90 degrees just cut a little deeper on one side and it will work about the same way. Like you say, once you get the hang you can eye ball it. Nice video.

[SirCarlosMusicBMI]

Yeah I saw you hanging on to the Bucket 😂😂😂😂
I hope you keep safe and the pole barn holds up 😂
Blessings, Carlos ✝️🙏❤️😊🇺🇸

[gordjohnson]

Good idea. I'll add that to my bag of tricks.

[midnighttutor]

I appreciate you making these videos. For what it is worth on this particular topic, may I offer a different perspective? To connect one round pipe to another with a perfect fit, you cut the joining pipe with two 45 degree cuts that form an included angle on the end of the pipe of 90 degrees. This is mathematically foolproof and much easier than trying to cut out some valley freehand (or with subsequent persuasion). It is essentially the same process except what I am suggesting is that your cuts are rotated 90 degrees and instead of carving a valley you are carving a point. Try it out! Best regards.

[DroppedDee]

Just want to say that this channel awesome and is an asset to anyone who is receptive. You had me sold on the "o-let" video. Thanks for sharing your knowledge !!

[Beauacadian]

I was welding down hole mandrels for Weatherford Enterra in the '90's and most of our fixtures and tables were made of old drill stem. Safety came through with a meter and they were almost all radio active. Be careful! Another great video! Thanks.

[michaelfarmer]

Awesome job! In a previous video a guy mentioned using a grinder on the saddle ears to help with better fit… I figured a hammer was more my speed. Looks like I was spot on! 😅💪

[MattHouse-xm]

Wish I had a salty teacher to learn from like you great channel

[zachhill]

I think something that is worth mentioning is how you set your flame, hit the gas valve with a little more pressure, then set your flame again while holding the air lever. Something as simple as that isn’t taught to this newer generation of welders

[NimickGolf]

Where did you get those heavy duty saddles? I can only find/have only used the thin red ones.

[OnRappel]

Not sure if you've posted any videos on your workout regime, but I'd be curious.

[BeADad]

Great video!
That hamering on the vice was pure genius!
Buddy how dangerous/toxic is cutting or welding on galvanized metals?

[alfredfleming]

With a Harris propane torch you can cut the bottom side without turning it over.

[Kevin-is-here]

I like that flattened out saddle, any suggestions for trying to flatten a longer piece without a vice, thanks ✌🏼

[jarrengabaldon]

Can you take a video showing that pull out table? I’m fixing to build me one

[chargermopar]

Another advantage of cutting with a torch. Hot metal is easier to bend. You would laugh at how I made bar joists for a shed using leftover rebar and angle iron!

[arlenhawks]

you are a no bull shit guy man you are LICKEDE SLICK, CUT IT, SMACK THAT FUDGER, AND WELD HER UP, get her done. WOW THATS HOW a real welder works. Brother I'm with you. Great Video.