How to fix your dewalt battery #battery #diy #tools #fixtools

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

I did this to one of my dewalt batteries and it worked. You only need to have them connected for just a few seconds then put on the charger and let it charge completely

dirty
Автор

It fucking worked!! Yessir we are back in business

RuckusHuckusYT
Автор

If you do this... use caution, fuckn thang can turn into a lithium ion bomb

ffsrdr
Автор

I tried this hack on an Amazon no-name DeWalt format battery....no-go. These mess up like this because one cell in the pack fails. The jump start will not shore-up a bad cell long term. If it works once, the battery pack will fail again soon. It might be good once to get the job finished but NOT recommended long term.

canuckfixit
Автор

The discharged battery failed because of improper voltage regulation. Add in various scenarios of the condition of the battery and how long it sat at a discharged point. These batteries can be very dangerous because of the failed voltage regulation. The battery might overcharge in your garage while you’re working somewhere else and burn your house down.

darthbane
Автор

Wondering (out of complete ignorance) why you can’t use the positive and negative on the charger instead. I’m guessing for the same reason it won’t charge the dead battery in the first place. So we’re using batteries because they’re not going to deny it a charge?

MINDWARDEN
Автор

A these blow up and catch fire if left in a hot vehicle for a couple days?

indiancreek
Автор

Mine must be to far gone ..it did light up and attempted to charge but could only get one bar over night then it went dark after i took it off the charger

maxapollo
Автор

Took mine apart and it is so corroded the battery pack is dead. Good tip if the battery is flat, though!

Jordan_B
Автор

You should rename the video a idea on how to fix a DeWalt battery

estimatingonediscoveringthree
Автор

What if I touched the wire together by accident on the good battery don't wanna work now..

joseibarra
Автор

My battery i jumped will work in my saw but still will not charge. Any one know a solution or is the battery none fixable

andrewharris
Автор

I did that still nada after u jump stared my car

cepedacarlos
Автор

Didn’t have wire so I used two razor blades and it worked👍🏿

ronelleborrego
visit shbcf.ru