DJI Mavic Air Remote Pairing How to

preview_player
Показать описание
How to pair your Mavic Air to the Remote and Phone.
Buy Now on Amazon

Buy Now on DJI
Рекомендации по теме
Комментарии
Автор

You should practice making videos for the viewers - always check what the viewer can see. Make sure all relevant items are framed and in focus.

jacquesdemolay
Автор

Thanks for sharing! This video is the only one which has an uncut sequence of pairing and is valuable. I have a Galaxy S7 and spent nearly 2 hours trying to pair the phone to the RC and the RC to the Mavic Air... also went through 1 whole battery in the process and drained my phone battery. PITA until I found your video. I was able to pair the RC to the drone, then began calibration, which was successful, then had to update the drone firmware and wouldn't you know it, the 2nd battery was below 50% so I couldn't finish it to take the drone off the ground... It ruined my excitement to get it today. Thanks DJI for not even having a simply version of pairing... UNCUT. Thanks again "Phones and Drones" for this video. I hope it helps others. I'll be sharing on forums as needed in the future.

PatrickMcCoy
Автор

when un r recording how to, make sure everything is visible on camera!! which cable did u put in the controller for instance and stuff like that.

platonicdreamer
Автор

Yeah, i noticed the camera lock was on he craft when powers on. Did your camera break?

whitham
Автор

Do we even need to connect using usb? I did it first time without using any usb cabl

karmaplays
Автор

You also powered it on with the gimble guard on. NOT recommended if you don't want burnt out gimble motors

sqpbc
Автор

Dude one simple and most important rule. Never switch the drone on first before the controller and never switch off the controller before the drone

KaziologyVlogs
Автор

Hello Sir, my Mavic air remote broke, so can I buy new remote.?? And how I pair with it .. please help .. thanks

vinhha
Автор

Very helpful video but atleast get the things you want to show within the screen. I can't see some parts clearly.

dant
Автор

problem is :: you had disconnected the RC and the DRONE wire, so somehow it connected via WIFI even thos connect thru wire was selected. QUESTION IS : can the DRONE be connected to RC AND RC connected to the PHONE at the same time ? ive read where you can only connect thru one PORT at a time on the RC, yet without the PHONE connected to RC there is no APP control of RC / DRONE

darrellcollins
Автор

I have a smartphone asus zenfone 2 551, is it compatible with this drone? I do not recognize the smart, help me please? Thank you!

FotosAriel
Автор

cheers worked for me, I was using the ipad but the wireless was shocking, just tested the mavic air on my desk for my friends house two doors down lol, having remote connected to fly is awesome, so always connect using wired to remote never wireless :)

Trentino_Adelaide
Автор

The USB C cable you are using is to connect your Mavic Air to your computer.
You can do this when you want to download your videos from the drone internal memory onto your computer.
So you should not plug it into the Remote Controller !!! I don't suppose it will do any harm - but it won't do any good either.
The instructions you were (mis)reading on the leaflet were asking you to plug another (smaller) usb cable between the Remote Controller and the mobile phone (or tablet).
You have 2 of these smaller cables supplied by DJI in your drone kit: one is for iOS and another for Android based phones/tablets.
You mount your phone onto the RC and then you plug the small cable from the left side of the RC to your phone.
My DJI GO 4 software detects the RC and the drone with no issues within a minute.

jacquesdemolay
Автор

WOW Thank you so much I have been messing with this setup for awhile.

davidselzer
Автор

Thanks for trying, but honestly this video is badly made that it's actually left me feeling angry. Sort you camera angle out man!!

krackerrsss
Автор

Just got the Mavic air, and can't seem to get it to pair to my Google pixel 2 xl ... Any advice would be appreciated

nicksim
Автор

Thanks! After 100 attempts now it is connected.

aldinicola
Автор

I turn on my drone and the props turn ; gimbal moves i am supposed to hear the fan inside spin up and i should hear the sound alarm and i should see the red light flash... BUT i dont.
After the Props, Gimbal movement, i get a yellow light, it stays on constant yellow.


What can i do here, please


I have not looked around and have just left my drone in the bag for 6 months.

CollosalTrollge
Автор

Good video but should have removed Gimbal Clamp before starting! Done this a few times myself - don't think it does the camera any good!

davephantom
Автор

At 2:10 camera cover wasn't removed

aurelios