How to Replace Throttle Body 14-19 Chevy Silverado

preview_player
Показать описание

In the video, 1A Auto shows how to remove and replace the throttle body. The video is applicable to the 14, 15, 16, 17, 18, 19, Chevy Silverado

🔧 List of tools used:

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Рекомендации по теме
Комментарии
Автор

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

AAuto
Автор

Great video and explanations. Just saved $400. Thank you. Keep it up.

SFCRET
Автор

Thanks for you video. I have a 2016 GMC Sierra 5.3L and it’s doing exactly what you’re describing. As I slow down to a stop it feels like a down shift and as I accelerate from a stop it jerks hard as if I floored the pedal. I thought it was the transmission then thought maybe electrical issue. I ran my scanner and it’s a random misfire with a blinking CEL which is also giving me an emission code. I changed spark plugs and wired, swapped coils and it’s still a random misfire. Could it be anything else before I jump to changing the throttle body?

utrocker
Автор

What are those two Tubes with the gray clips you’re taking off? I have engine oil in mine and don’t know if that’s supposed to be like that, going on my second throttle body in 3 minths

mattlecroix
Автор

is this common to replace whenever my rpm is at a lower rpm than usual? because my 2017 sierra at 45 mph speed the gauge moves up and down. I would like to know!!

eddiegonzalez
Автор

What’s the reason to replace the throttle body on this particular truck what are the effects

davidacosta
Автор

Is there an iac valve on these trucks? From what I read it’s on the throttle body but I am not seeing it anywhere near it

HewHolden
Автор

I have reduced engine power due to code P2101 it says about throttle control. Not sure if its the sensor or throttle body itself have issues or wiring

AeriaGamerz
Автор

What if I did move the blade back and forth slowly a couple time to make sure I cleaned it well ? Should I be worried that I broke it or messed it up ?

evoxgeo
Автор

Great tutorial video, you guys are they only people to go in-depth about throttle replacement and cleaning procedures, and reprogramming the (ECM), or re-learn the new idle. I cleaned a TB on a 2008 Chevy Tahoe cause of the engine code, and I finally had to see a mechanic top slap one of those 5-k computers to get the idle correct, cost me $85.00. My question is how successful is the manual re-learn procedure on my 2015 Silverado, if I clean the TB, Would I have to repeat what I did for the 08 Tahoe? Please reply, it would be greatly appreciated!!!  Thanks in advance.

MrJamesgrate
Автор

Should there be a slight space between the throttle body and manifold? I replaced mine and it doesn’t meet flush. Is this normal?

cuttercanfixit
Автор

Can not find the throttle body on the site

Razor
Автор

Can someone help me I found oil on those hose clips he took off is that bad ?

ricardoramirez
Автор

Do I need to torque it ? I just have a wrench I can’t just tighten it till it’s tight ?

felixcardenas
Автор

do you guys have a video on replacing the active grill shutters on a 2017 silverado?

MiguelGarcia-ikji
Автор

Changed mine but now when in park it will idle high to 2000 RPM then it will drop

Hamburgesa
Автор

Thanks for this good video. It worked like a charm.

AVRWorks
Автор

I have pushed open hundreds of throttle body blades / butterfly's open and cleaned everything with carb cleaner or Sea foam and never had problems. Why would you tell people to not take cleaner and clean it out ? I would say don't submerge it in cleaner or clean it in a parts washer, but it's perfectly safe to clean it, besides carb or throttle body cleaner evaporates fast.

logicalguy
Автор

good day, can you tell me how to change the iac sensor of my 2015 cheve silverado 1500 please

boriscabrera
Автор

Im still at a high idle. what do you mean by Clear the code again?

jimokeefe