How To Install 3 Piece Cranks - Haro BMX

In order to be able to shred your BMX till the street lights turn on, your bike needs to be mechanically dialed! And so it is key that you know how to keep your ride in shred-ready shape. Sit down with Haro Product Manager, Kevin Conners, as he walks you through the steps of installing a set of 8 Spline, 3-Piece cranks.

Kevin is installing the Baseline cranks on our Slo Ride Legends Complete Bike. Check out our full Legends Complete line at the link below.

Subscribe to our channel to stay up to date on all Haro content!

[Sinzday]

I'm glad to see you know how to do it. I purchased a 21 Sloride from a shop off the internet and it came in with a crank bearing issue right out of the box (when I ride and all of my weight goes down on the right crank there is a clicking noise at almost the bottom of the motion as the crank gets almost straight right crank down and left crank up) so I looked it up. I found a gentleman who owns a shop in Cali who said on video that with these models "a lot" of them come out of the box like this. Not the Haro of the fo sho. I don't have the tools for that job and on top of that I don't want to scratch, rub off, destroy the black paint on the crank itself so I just don't even ride it at all. No shops near me that really deal with these kind of bikes. Plus straight from the box when it got delivered, box was in great condition and somehow, for some reason the front tire when seated properly before tightening front fork rim bolt channels aren't level so when you tighten them it is sitting at an angle to the left just a degree or 4. I guess I got got. I just wanted a beautiful bike like the 94 95 Haro Race Team BMX my mom bought me when I turned 15. That was "That" bike, hands down my favorite bike I ever had.

[ACIDmyBedinHalf]

Great camerawork and moves at the beginning. BMX ballet.

[BadassDZ]

They put more grease on the spindle than they did on my entire complete 2021 Haro 26 DMC.
Sounded like an old barn door.

[ROJODIX]

Good crank knowledge and clip production

[heijxje]

What is the torque I need for the spindle bolts? My son has an older Haro Pro (flame red if that indicates the production year) of which the left crank comes loose almost every week. It has cranks without pinch bolts so training well and truly stops when that happens. Do I risk over-tightening them or am I under-tightening them?

[ricardoayala]

Hin my haro zx24 finally gave out. Do you have a link to the crank and spindles you used?

[budh]

Wait, why are you putting grease on a bolt that has loctite on it? Its supposed to seize the bolt in, and you use a little heat to melt it to loosen it, thats why your stuff is coming loose.

[ryegee]

Hey I bought a 26 inch bmx and the cranks come loose every time what shud I do new ones? Please get at me

[adamn]

What size or kind can i get for my 24in Shredder

[Rwpw]

what size crank would i need for a haro 29inch sloride?

[Thesausagemonkey]

What brand of bearing press is in this video please?

[MickStich]

How do i convert from a one oiece crank system to a three piece crank?

[DonB-mphp]

My crank sounds freely but doesn't spin for very long, ..I just swapped up from old school one piece to a 3 piece with sealed bearings, they sure don't spin as freely as the unsealed bearing ring...will they be alright or should I spray some lithium grease on them