How to Install a Widespread Faucet | The Home Depot

Follow the steps below to install a widespread faucet:
0:00 How to Install a Widespread Faucet
0:16 Tools & Materials
0:28 Step 1: Turn Off Water
0:42 Step 2: Remove Old Faucet
1:16 Step 3: Install Center Spout
1:43 Step 4: Install Faucet Valves
2:05 Step 5: Connect Supply Lines
2:43 Step 6: Turn On Water Supply Lines
2:49 Step 7: Check For Leaks

#TheHomeDepot #HomeImprovement #DIY

About The Home Depot:
How doers get more done. We’re helping doers in their home improvement projects. Now you can take on more renovation projects with more know-how. Our step-by-step instructional DIY videos and expert advice will give you the confidence for your next project with hands-on learning. It’s a good time to be a doer.

Follow The Home Depot:

How to Install a Widespread Faucet | The Home Depot

[ohioguy]

And the drain/stopper installation?
also if you are smart enough you will put the thread tape on before you have it on the stink rather then try to do that over your head under the sink.

[torywhitson]

There’s a whole step missing, who do you unclip the plastic attachments on the water lines?

[campbellnote]

from 2:30 to 2:40 seems a bit confusing.... Missing info...

[timelessadventurer]

Didn’t show the drain install…and the hot/cold install was rushed and skipped over around 2:30

[raycimbalnik]

If the center tap is as tight as it will go and still rotates how do I fix that?

[DAS-Videos]

She did it wrong. She turned the nut counter clockwise to tighten it, she didn't realize she was loosening it. She didn't know how to put the handles on so she just left them off lol.

[MrGaborseres]

These are over engineered piece of craps 💩 that fail on a regular basis after 5 What ever happened to simplicity and function?
Thanks for showing the instructions 👍🥴....I replaced one just like it the other to hell around the handle

[kjiqcsb]

Wrong way to do it anyways, she didn't hold the shut off valves with a wrench while unscrewing the supply line especially on a PEX style shut off valve, you don't need Teflon tape on the faucet valve body. She hand tightening the valve bodies only so now the whole valve body will turn when turning on the handles, she was screwing the supply lines on the wrong direction, lol lol what a hot mess video