How to Setup Lutron Pico Remote

preview_player
Показать описание
Wonder how to sync a Lutron Pico Remote with your dimmer or switch?
Let me show you how to do it.

Рекомендации по теме
Комментарии
Автор

Excellent! Super clear and simple. Much better than the confused and poorly worded instructions from Lutron.

ericgersh
Автор

Thank you for taking the time to upload this video. I Set mine up in 30 seconds.

robhersey
Автор

Great video! Thank you! I need your advice. For some reason, my 3 Lutron Caseta dimmers, installed 7 years ago, have stopped retaining the desired brightness level. Can a Pico remote help me save this setting, considering that on and off times are programmed through my phone and functioning correctly?

mirongalperin
Автор

I followed your instruction for impairing here, but I cannot get the Pico remote to UNPAIR from a few switches.  

We have a panel of 7 switches for our living room. We just want to have remote control over three of them. Unfortunately, when I originally set it up, I thought I could control all 7 separately. I cannot. So, how can I unpaid four (4) of the seven switches from the Pico remote?

PatrioticDemocrat
Автор

I have a Lutron remote for my wall mounted bedside lights. I want to reprogram the remote to a lower illumination setting when I press the 'on' button at the top of the controller. At the present time, the lights are too intense when I initially turn them on for the first time. I want an initial lower setting, so I don't have to quickly use the dimmer button everytime I turn the lights on.

ArthurEverett-ko
Автор

Which electrician did that install? Screws sideways on the bottom row of plugs and up and down top row. lol need to figure that out. up down all day.

georgemorrison
Автор

EXCELLENET fixed my remote in less than 5 seconds !!

DOSPrincess
Автор

Does this work without WiFi and without a Brigde?

irwindelao
Автор

Can you use 2 different pico remotes (say 2 different locations in a room) to operate 1 set of lights ?

I like each one of my nightstands, on left and right side of bed, to operate bedroom ceiling lights.

tjam
Автор

I unplugged 3 ceiling LED lights that are controlled by a pico remote. The pico controls a pico remote that is in the attic.. When I plugged the lights back in after painting they no longer work. Is a reset required?

marcthibault
Автор

Abso-frickin-lutely amazing! Thanks for such a concise, perfect video!

totheknee
Автор

Can the same pico remote synchronize with ceiling fan lutron switch?

jmp
Автор

Can I use multiple picos to sync together to control the same lighting circuit for different locations

chickenish
Автор

Do I need to use one pico remote for each switch? I have 5 remotes, and wanted to make sure.
Great video, thanks

saulfelix
Автор

The remote has that center button to SAVE a light setting... does this mean that the base switches ON button automatically turns the light to maximum brightness? Or does it work like a manual dimmer slider + switch where the turning it on will turn the lights back to whatever brightness level they were at when you hit OFF?

InfiniteClouds
Автор

Hi Dear, I am under if Lutron Maestro Combination dimmer and fan control
Model #MACL-LFQH-WH-C can be pair with pico remote?

preetchahal
Автор

Hi! very helpful. I already have a lutron caseta system running in my apartment, but I made an extension of it and bought new dimmers, how can I link this new devices to the current configuration? huge thanks

dorehernandezbutron
Автор

Mine pico don’t pair with the switch.. do you think the pico remote is damage

adolfodiaz
Автор

Can I program a pico remote to control another pico remote?

BlueBeardAudio
Автор

Doing it this way, can the remote control each light separately? Or does it control all the switches together?

ravimurthy