How to bypass your pcm/ecm on 2001 dodge ram 2500

[DonnieGaines]

😊thanks I started having trouble with my 2000 3500 3 years ago it would start fine in the morning cold but after it was warm long cranking after it was warm and a friend told me to disconnect the temp sensor on front of engine and I did it started perfect after that but check engine light come on no problem I drove it three years that way. And now some time the tack quits working if you shut it off it will not start again until it cools off you. Today it would not start when it was cold so I done what you said to do and it started so I put a relay in series with the wire so now when it wont start I use the relay to temporarily bypass the ECM THANKS

[ricardojuarez]

Pin #6 from the vp44 black wire needs a true ground.. probably that's my issue cuz this vehicles fall a part starting with the dashboard and really bad, but besides that, we have a very reliable strong truck.. at least allow us to trick a few things.. thanks in advance 👍👍

[lazer]

How can you get the truck idle to go down and work normally

[MariaHernandez-vrkg]

Can I do it on a 2001 Dodge ram 1500 motor 5.2 gasolin because it has nobus?

[lazer]

Why would someone run aground straight to their vp44 is this to test and get out of a jam broke down

[dericklafleur]

Now what I need a new pcm and ecm ?and do I also need a new ctm box

[Fredwright-np]

It worked, my truck starts now. Does this mean I need a new VP44 or do I need a new pcm

[TheHyde]

This is why you dont buy a used dodge from anyone under 40.

[gilkennedy]

The truck turn ON then what? I wanna be able to drive it without the computer ?

[abelvalle]

Pin 6 is good, pin 7 my tester says no juics

[deerhunter]

What is the point of this procedure???😂