How-to: Fix GPU Sag -- UpHere GPU Brace Install and Review

How-to: Fix GPU Sag -- UpHere GPU Brace Install and Review
Does your GPU sag or droop? In today's video, I install a GPU brace (linked below) from Amazon to fix my sagging GPU problem. Turns out this is a very CHEAP and effective fix!
Enjoy!

*** WATCH NEXT !!! ***

*** Products featured in this video or other products I recommend ***

*** Follow me on Instagram and Facebook for behind the scenes content coverage! ***

*** My Channel Gear ***

*** Music Credits ***
Track: JJD - Adventure [NCS Release]
Music provided by NoCopyrightSounds.

*** DISCLAIMER ***
If you online shopping via the links provided in my videos these may be targeted affiliate links that specifically provide a small commission paid to me to allow me to continue funding the content I create for you. This is of no additional cost to you and is a fantastic way to support my channel! Thank you so much!

#fixGPUSag#HeavyGPU#UPHere#GPUSagBraket

[beProsto]

Motherboard: ASUS
Graphics card: ASUS
Wallpaper: *AORUS*

[yofat]

Vertical supports are much better and will work for a wider range of gpu's. Worked better for me than the horizontal ones

[wolmandbaker]

Very helpful, Funny how the GPU manufacturers are not bothered by this problem. Well, you`ve already paid for the card, so why should they?

[godocruz]

Hey dan.. Thanks for this video!

I was looking for a good GPU brace and then saw your video.

Got me the black one and I hardly notice any GPU sagging on my ROG 3070 Ti.

I don't even want to imagine what would happen to my PCIe slot if the GPU was left inside my PC case without a brace to support it.

[Chow_D]

best How-to for GPU bracket cuz it actually shows how do it if the screws are outside the case which mine did and I couldn't figure out how to do it

[GabrielTobing]

Just bought my first GPU, an ASUS dual 580.

The GPU sagged and I started freaking out and wondering if it would break the PCIe XD

[cmoneytheman]

I never had the Magnect kind, but these seemed more stable, so I bought them from eBay. The reason the magnet kind didn't seem as good to buy was because it can move when a person hits the PC or while moving the PC. Well, not with this one since this one screws

[mikeelek]

An interesting product. I've been thinking about making a brace (post) from non-conductive wood. Probably a 1/2-inch dowel.

[rpospeedwagon]

My 3090 Suprim X comes with an anti-sag "stand" that supports the end of the card. Seems stable and leveled. But let me know if you think this bracket is also recommend in your opinion.

[Dermetsu]

Useful video, just a massive 2060 Super and soon as I got it I saw a disclaimer in my Mobo telling me I likely had to install one.

[Lt.Shineysides]

i got this same bracket today it doesn't work for me my card is far too heavy! strix changing my gpu and motherboard power cables tomorrow hopefully take some strain off my gpu then dependant on how back the sag is i may need to try a stand or something along those lines :/ i have a corsair 680x so it's a big gap from the card to the bottom of the case.

[yungwallacebenson]

I’ll have to move my pc in between houses frequently. Should I buy one of these?

[PCTechHustle]

DON'T FORGET TO SUBSCRIBE!! Also, be sure to tick the bell icon to be notified when a new video drops!! THANKS FOR WATCHING!!!

[ambrose_]

Great Vid, thanks for putting the time into this. Imo, if you ahve a 3D printer, just print a small support for the end, underneath. If its black like the interior, it will barely show, if at all. And can even blend into the design.

[randomcatontheinternet]

I just put a chopstick as a pillar to support to my beefy GPU, a temporary solution become permanent now time to do it properly after month of negligence

[b.henriques]

Hey that's pretty helpful. Thanks.

[DeadlyCookie]

So funny I bought this for the exact same strix card before watching video

[mickknight]

Still sagging a little, those type of braces are shite.

[lucaskaufman]

Anyone else having trouble getting to mount in in the rtx 2070 super??

[ivangabriel]

I need something for my Gigabyte 1070 OC :( i can design something but im looking for ideas