Repair and restore 6 Bosch Ixo screwdrivers....Ixo 4

preview_player
Показать описание
I bought 6 not working Bosch Ixo screwdrivers and three chargers.
Over the following videos I hope to fix them all.
  1. Daft Old Man
  2. Bosch
  3. Scredriver
  4. Ixo
  5. DIY
  6. Repair
Рекомендации по теме
Repair and restore 0:18:57

Repair and restore 6 Bosch Ixo screwdrivers....Ixo 4

Repair and restore 0:19:22

Repair and restore 6 Bosch Ixo screwdrivers....Last one I promise!

Repair and restore 0:36:08

Repair and restore 6 Bosch Ixo screwdrivers....Ixo 5

Repair and restore 0:21:01

Repair and restore 6 Bosch Ixo screwdrivers....Ixo 3

Repair and restore 0:17:49

Repair and restore 6 Bosch Ixo screwdrivers....Ixo 1

Cordless Screw Driver 0:15:08

Cordless Screw Driver BOSCH IXO Restoration and USB TYPE-C Convert

Repair and restore 0:51:23

Repair and restore 6 Bosch Ixo screwdrivers....Ixo 2

Restoration and repair 0:21:47

Restoration and repair of Rusted BOSCH Power Cutter|| Amazed with the end result?

Cleaning / Polishing 0:03:07

Cleaning / Polishing / Dressing Of An Electric Motor Commutator #Repair #DIY #HowTo

RESET Bosch Serie 0:00:38

RESET Bosch Serie 4, Serie 6

Wiper Blades Hack 0:00:40

Wiper Blades Hack

Bosch Angle Grinder 0:16:59

Bosch Angle Grinder Restoration GWS 21-230

Reviving a Dead 0:08:40

Reviving a Dead 6Ah BOSCH Battery that I bought from a Flea market!

How to fix 0:00:32

How to fix a battery #dewalt#batterysave #diy

Bosch battery (or 0:00:22

Bosch battery (or charger) defective GAL 18V-40 - GBA 18v 5Ah dead on arrival (green led on, 0 charg

How to Rebuild 0:00:44

How to Rebuild a Fuel Injector (quick fix)

Restoring an old 0:09:57

Restoring an old vintage Bosch UBH 6/35 hammer that will not start.

Restoration (Repair & 0:09:45

Restoration (Repair & Refresh) Bosch PSR 3,6V 1998

Softener leads to 0:00:41

Softener leads to machine failure

BOSCH gsr mx2 0:00:32

BOSCH gsr mx2 drive planetary mechanism

Restore bosch vertical 0:27:06

Restore bosch vertical saw GST 60PBE | Tân Bùi restore

Restoration Angle Grinder 0:17:19

Restoration Angle Grinder BOSCH GWS 7-100

How To Fix 0:00:50

How To Fix Error E23 Washing Machine Bosch?

Repairing a Bosch 0:48:17

Repairing a Bosch GBH 5-40 DE Rotary hammer, FULL Service tool restoration.

Комментарии
Автор

Were the charging units ok?
I've got one giving 12.5 volts output and the machine refuses to charge...should be about 7-8 volts... Inside the secondary of the transformer gives 8.5 v ac before the rectifier block but arrives at the output pins at 13 vots.. too much so the gun won't accept a charge.. any ideas?

johnkilvington
Автор

Well the battery lasted the length of the video, which is all you need. But would not suggest this if it was for a pacemaker! 🙂

TheEmbeddedHobbyist
Автор

should have just replaced the battery when you had it de-soldered and saved yourself some bother..

fatbelly