Installing Stone Veneer Over Cinderblock / Outdoor Kitchen Build / DIY Stone Veneer Install /Part 14

In this segment of this outdoor kitchen build tutorial, I will show you how I install stone veneer. I apply about 180 square feet of stack ledge stone to cinderblock. Along the way I share all of the tips and tricks that I learned. I also install a surround to the exposed pizza oven base to meet the stone veneer, and create a nice finished look. If you are a DIY guy like me, and you want to see what is involved in installing stone veneer, check out this video.

Link to my cooking channel: On The Flame

Links to the other parts of this build:

[viktorborhardt]

The best build of oven on YouTube for me. Iam getting starting in few weeks to rebuild exact that oven. So I want to say thank you for that support and many details I was searching for. Best regards from Germany

[Craycrayallday]

Looks awesome, as someone in the landscape construction/ masonry field. The one thing I’d recommend is to avoid having a joint where 4 corners touch like at 1:33, use a longer piece to break that up. Small detail that’s not really noticeable, but it’s a general rule of thumb with stonework that isn’t in a tile pattern. Same goes for patios.

[nxvx]

That corner with the post was killing my OCD until you placed that L shaped piece at the very end.

[jamesdray]

Beautiful, really nice and an enjoyable Video to watch. Well done

[Chris-oskz]

Love this series, inspiring me to build my own

[Rustie_za]

"At some point you are going to say screw it and start installing direct to the wall" Mind reader, predicting my actions like some bulls eye magnet.

[AndresLler]

Do you seal the wallstone after or no need not? Also, how you take out one stone that's not straight without breaking it so it can placed back?

[MrSeebsy]

Looks Awesome, I just built a U shaped wall & am going to apply same stone veneer.... Notice you didn't apply a scratch coat? I tried a scratch coat on one small section but it just crumbled... I think I'm going to use your method. You used just standard Type S right?

[onpointbbq]

I’m in Suffolk county, where did you purchase the firebricks if you don’t mind me asking

[Thatcham]

Looks like a tiresome job ! but looks amazing finished

[RexAWells]

Thats one expensive oven, I don't see the value

[dickies]

How did you figure out the curves for the top brick that goes around the oven???