2008 - 2012 Honda Accord 2.4L PCV Valve Replacement!

Показать описание

Welcome back everyone! In this video, Bob shows how to replace the PCV Valve in a 2008 Honda Accord. This guide can also be used in some older Honda vehicles with the 2.4 liter, 4 cylinder engine. Let us know in the comments what you think! Thanks for watching!

*FYI: Unfortunately, this did not fix the problem. Car still eats oil.

Products used in this video:

Some other items to consider:

Video Gear:

As an Amazon Associate, we earn from qualifying purchases.
We get commissions for purchases made through links in this post.

Disclaimer:
Trick Shift Garage hosts are DIY (Do IT Yourself), not mechanics. Due to factors beyond the control of Trick Shift Garage, we cannot guarantee against improper use or unauthorized modifications of this information. Trick Shift Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Trick Shift Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Trick Shift Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Trick Shift Garage.

Рекомендации по теме

Комментарии

I am glad Honda made it accessible on the 2.4 engine. Some cars make it so hard to get to.

martyneilan

Perfect video. Just please recommend that it’s torqued correctly. That’s important. Thanks for the clear concise video.

mikem

thank you so much! just replaced my pcv for 07 accord. oct 2024

vi

Nice video very explained. I hope this solved you oil consumption.

joec

This is very common issue with almost cars. Neglected oil and filters services usually cause this problem. Years back I bought a used Nissan Tiida 1.8, driving back home I noticed car was struggling to run as someone holding a neck to breath. Few days later, I did major service myself all plugs filters etc and luckily replaced the PCV with genuine part, old PCV was almost chocked no rattling sound. After service when I drive the car it was total different car..more pick, smooth idle and drive.

But the old PCV had already done the damage when few days later in morning struggle to start. Obd2 showed crankshaft sensor problem when I removed old crankshaft sensor it was completely covered with engine oil then I realized old pcv valve damaged the main Centre seal and pool of oil was in engine and transmission housing belly. Unfortunately oil was not dripping on ground so I couldn't noticed it though it was reducing engine oil. Long post but my experience replace PCV early 60k or 80k if oil drains are late and check main Centre seal.

coolbema

Perfect video thank you, even if I don’t speak English I understand very well thanks

jovannypatricio

Thanks for the video. Changed the PCV valve on ours with this video. The old valve still rattled a little as well. I saw in the comments that you said it did not fix the oil consumption and you were trying something else. Have you released that video yet? If so what is it's title? Thanks

mcgvr