Homemade Halfpipe Fail…

[NTHRO]

Tony hawk games ramps be looking like this

[TYMcablerunner]

Plywood only bends one way, you need to turn a 4 x 8 sheet on its side so the bend is in the short side. Doesn’t bend against the grain, bend it with the grain.

[satj]

it’s too steep lol but better then no half pipe

[CHRSUNDY]

You forgot to soak the wood in water to bend to your ramp before nailing down

[cam]

Put a couple more sheets on top the other way and it’ll work perfect

[rodolfoxavierneto]

Someone forget to use subdivision on that project, render again

[theycallmedahawk]

BIGGEST PROBLEM IS NOT THE CURVE!

ADD 4 MORE FEET TO THE FLATE TO CREAT MORE SPACE BETWEEN QUARTERS

FINISH SCREWING YOUR PLYWOOD DOWN GO GRAB SOME MASONITE AND SKATE PAINT TO RECOAT THE PLYWOOD IN MASONITE. AND THE SKATEPAI T THE SURFACE USE SOME RUBBER COATING TO SPRAY REST OF RAMP ADD A PLAN B STICKER AND YOUR GUCCI

[Resurrected-Silverbeard]

Someone's dad surprised them with a mini ramp? No skater could think this is good.

[cashninja]

Do a pt. 2 with the finish an let him drop in again lol

[timothinking]

Just use 2×2 and 2×4 to make the curve and skin it with 1/4" sanded ply. Or use a table saw and 3/8" deep relief cut your 5/8 ply and pin.

[Mutantsh]

It’s like they gave up during surfacingnit because everything else looks legit maybe they just dudnt screw or down yet

[ParadoxGraffiti]

Use some rly thin flooring material wood

[smoothpoon]

Turn that plywood 90 degrees and give it another try fellas lol

[PositiveVibesVids]

This ramps hilarious it's not even curved it's just 2 triangles \> 🤣

[Juliano_DJOL]

Where's the flat bottom? Looks like it was all eye balled or free cut haha! Hey atleast yall tried tho!

[johannesschneider]

A little knowledge and craftmanship and that material wouldn't have been wasted like this

[jaSon]

This is downright embarrassing lol. The type of people who think they know everything and research nothing before getting started. Guess it doesn't matter much though if you can't even drop in.

And that's the cheapest grade plywood that you could possibly use. If you're going to waste your time making a ramp before knowing how to ride on one, at least buy it if you have no hand skills. Too narrow, not a long enough flat in the center, no notch cut into the sides for coping to sit on. It's more of just a steep bank. Waste of money