What's the difference between the RV 50 Amp Cable and the Inlet Box 50 Amp Cable?

preview_player
Показать описание
Comparing the RV 50A cable to the generator 50A inlet cable

The 50A California Standard locking style is the CS6364, Heavy Duty 6/3+8/1 Gauge STW Wire California Standard locking style with center guiding pin for generator Inlet box.

The 50A RV/Generator Cord with Locking Connector, Heavy Duty 6/3+8/1 Gauge STW Wire, 14-50P Male and SS2-50R Twist Locking Female for RV Camper and Generator to House

Рекомендации по теме
Комментарии
Автор

Please do a complete comparison of all plugs and inlet boxes in the marketplace.
Name and types of male and female adapter

gordonbickel
Автор

Gavin's, thank you for another awesome video 👍👍👍❤️❤️❤️🙏🙏🙏

athenanimbuss
Автор

I have the rving pro 50amp inlet box and 25ft cable, it has the center pin for alignment. The problem that I have with this cord is that the angled generator plug does not insert far enough into the generator. The angled plug hits the front of the generator and does not go into the generator plug far enough.

dennisferguson
Автор

Important to point out the voltages on these. Are they 120 or 220 volt hookups and why it's important to know?

mycapstone
Автор

I’m a 30 amp RVer and it good to know what up with 50 amp RVers

ericwilliams
Автор

I’ve got a question is it safe to bridge or tie 2 30 amp 4prong inlet box together. One inlet box outside, one box inside the inlet box outside will obviously be use for the gas generator and the inside inlet box will serve two purposes. for the transfer switch when solar power station is drained. And for the rainy cloudy days to charge up solar power station, using the special adapter not simultaneously, but when needed. I hope you understand this question.

imxaxninja
Автор

@Gavin's Garage what if we simply cut off the extra metal point in the middle? Since is has no contacts and serves no other purpose than stabilization that should make it work in the rv afterwards right?

hammerremmah
Автор

Question: If I use a 4-prong 30 amp (L14-30P male) to 50 amp (14-50R) adapter to run a 50 amp RV with a 30 amp 120/240v 7000 running watts Generator....Does the power on the 50 amp side will be splitted even between the 2 legs as to have 3, 500 running watts each?

fernandosierra
Автор

What size barker you recommend to put in Panay box for 50 amp?

georgegause
Автор

I know how you can use the home plug in your RV. Just drill a hole in the middle of the RV inlet. Make sure to have the power on so you'll know if you drilled too far. 🤣

Tom-In-Ga
Автор

are the 2 cables not designed to be interchangeable? Is this just a marketing gimmick to force you to use a more expensive RV plug on your RV?

tommyknocker