How to cut 6X6 fence post, done easy with a simple jig fixture.

This simple fixture helps you cut 6x6 post quickly and square with a reciprocating saw.

[doughaber]

Great job. I take an extra blade and slide it into the curf once I'm about 1/3 way cut. It acts as a shim and makes the blade cut a ton better with less vibration. Hope this helps 😃

[billa]

Thanks for taking the time to make the video. Sometimes the simplest solutions are the most ingenious. I don't have time for ingenuity on every little detail of every project I do. Thank God for YouTube and for people like you who care to share. (And, "YES, if you want a straight cut with a reciprocating saw you need a jig!!!"--Ignore the haters.) Thanks again.

[GeoMass]

Thanks for the video. I have 24 of these to cut and you just saved me time and money. Thank you!!

[jeffbeck]

Great video and the sheet metal is the perfect fix for not cutting into the wood . Thanks for a great video.

[armandoperezjr]

You know you’re getting old when this is what you watch on YouTube for fun.

[nicholascohen]

Thanks from Australia! The use of sheet metal on the jig a bloody good idea! I hope my 18v reciprocating saw can handle the load.

[zombiehunter]

Thats a pretty cool model to make for cutting 4x4s posts

[spicewoodpeopleify]

I like how you took your time with the cut. Easy thing to forget. Cool gadget

[MsDabree]

Awesome! Great idea! I have to cut already installed posts on a deck to fit new wood. Thank you!

[MisterMitchMM]

Amazing the number of armchair quarterbacks spewing advice in the comments. My math professor once told me "there is always more than one way to find a solution". The method works for you and in the end that's all that matters. Great job gettin' jiggy with it.

[davidazinger]

Amazing -- very ingenious of you --- thanks a lot for the video.

[dawger]

Thanks much. I need to cut the tops off some round wooden posts where you can't get a circular saw on to because they're close to a wall. This will get er done.

[RayStein]

Thanks! I knew there had to be an easy way.

[glamour]

Great jig, came in handy this weekend!!!

[dominiccassar]

Genius!! I'm gonna try this w a few pieces of angle iron! Thanks for the idea

[OldAndGettingOlder]

Clever idea. Go a step further and slope the jig to promote water run off.

[kiiiburn]

Thanks. I need to use this technique on a 2x4 half wall for a counter bar top. It isn't level and the cabinets are already in!

[TheDakotawolf]

Pure gold information I need and within my budget

[mskehan]

Great idea but seems if saw with saw blade resting on two metal angles maybe make straighter cut? Still great idea I cut them in similar way

[stackmanstack]

That's one way to dull a new blade