Ender 3 Direct Drive Upgrades--Bowden&BMG extruder

♦♦♦For different fan shroud installation step,Please click on the video below:⤵

🔶This is an universal direct drive bracket kits for Ender 3 users,both bowden and BMG extruders are supported.Solid parts and 100% compatible with Creality Ender 3 ,Ender 3 Pro,Ender 3 V2, Voxelab Aquila 3d printers.

🛒For this Direct Drive Upgrades Kit ,please click:⤵

#3dprinting
#Ender3
#Ender3Pro

[unitakd-club]

♦♦♦For different fan shroud installation step, Please click on the video below:⤵

🔶This is an universal direct drive bracket kits for Ender 3 users, both bowden and BMG extruders are supported.Solid parts and 100% compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Voxelab Aquila 3d printers.

🛒For this Direct Drive Upgrades Kit, please click:⤵

[Baggins_lover]

Brilliant video! I assembled mine off the printer, but everything else was the same. I did have a small issue getting the screw in the extruder, under the hex screw, but I just took the hex pack out, popped the screw in the hole and put the hex back again, before screwing into the mount and motor. Works great!!

[mulletchatbot]

Thanks, i was just trying to look for the basic installation of this dang thing and couldnt find much on it. Majority of the videos on direct drives are prebuilt. Appreciate it!

[carterstringer]

Instructions unclear, I built a robotic dog

[Not_MarkV]

Is there a disassembly video to get the extrudir etc off to start with the video

[Grey-TW]

How long does the tibe have to be for an ender 3 v2 single gear, i cant quite tell from the video

[HeszaR]

It fits with some difficulty on my Ender 3 V2. The fan does not fit properly on the bracket. I have fixed this by some filing. Product support is very good.

[nimquie]

I got the bracket for my ender 3 pro when together perfectly on stock extruder stock hotend but good to upgrade them ...

[moondmonvisual]

How can I keep the auto bed leveling switch for this

[glpchrmndr]

Im having some issues finding a spot to put my fans and the filament lever has it in a very off position and im using an aquila s2 which it says it ahould work but its very weird and im just needing some help figuring this out

[rapscal]

Shouldn’t the connector for the extruded motor be facing up or forward? Seems with it stick backwards like in the video it’d crash into the top of the frame if the extruder was fully lifted

[SowRoll]

I used this on the Aquila x2 with the factory extruder lever, everything seemed to work fine It looks level and when I use the automatic feed button it feeds the filament through no problem but when I go to print something it seems sometimes it doesn't come out and it's not sticking properly. Was printing fine before installing the mod

[mplentz]

Might be a stupid question but Do I really need the bowden tube? Can't i just leave without it? (I'm new to 3d printing and just got this kit today at home) AAAnd, with this conversion, what is the range for retraction for pla or petg?

[matthewseitz]

any one else have an issue where
the screw that holds the lever on the extruder is now not long enough with the new bracket

[diators]

The tube did not go all the way for my Ender3pro in should i cut it? Thank you

[coroleon]

Does the kit come with the red thingy?

[alansedgewick]

Does the probe bracket come with the kit or is it available separate, if so where do I get one

[SnailedMail]

I think yall sent me the wrong screw size, the brackets wont screw onto each, other the bolt keeps spinning but wont go in like its too big

[ComaChameleon]

I installed this on my ender 3 pro with a dual gear extruder and BL touch, now my z-axis is not functioning properly. It will move up, but not down, bed leveling does not work, adjusting the z-axis via control does not work either. Any ideas?

[JustTouchCards]

Hello, I installed this in my Ender 3V2 and now I can't get anything to print. When I try to print something the motor and extruder don't move. If I hear the printer up and use the display to make it extrude 100mm it will work, but it I try to print any file it doesn't extrude anything at all, it doesn't even move. I'm just looking for some help/support because I'm very confused