Know how to adjust air/fuel mixture screws on ANY carburetor in 30 seconds!

Here's a quick trick to know which way to turn those fickle air fuel screws just by looking at any carb body! #shorts

Subscribe for the upcoming complete series on carb components and functions!

[iuopunderstandyourjokes]

This was the best and shortest explanation ever

[azetorajoseph]

I think this is the only best explanation about the meaning of adjustment on carburetor I have search for long on utube. thnx for ur good summarized work

[theamaturepro]

Well son of a dang, I learned something on youtube. Now I'm cool like the young people.

[patricklardieri]

It had been twenty plus years since I had been on a bike!!! I ride two strokes and my bike was idling really really high. I had changed the reed cage and reeds and couldn’t figure it out. This video told me exactly what I needed to know and I thank u for this video!!!

[charlesburk]

Good job getting straight to the point and explaining clearly. Thanks

[larrybenedict]

Best, quick and simple explanation yet 👍!

[Joshtheweatherman]

At sea surface levels or slightly above, usually 1, 1/2 turn out is good enough. The higher up you are, the more you’ll have to turn out.

[Jursaw]

Not always the case. Best way to tell is to remove the screw completely and if it has a fine point then it is a fuel screw. If it has a blunt point then it is a air screw.

[natefinnstrom]

Brother! I have been dealing with a lack of fuel issue for the last 6 months i kept backing the screw out.... because of this i know i need to screw it in... thanks so much!

[thomasd]

Straight up to the point & brilliant explanation 👍👍

[psylentsage]

Wow quick and to the point perfectly explained 👍🏼

[thelikebutton]

Not always the case. A lot of carbed motors are just idle air mixture screws with fixed jets.

[bunchesofoats]

....this gives me...tooo much confidence

[TheGrimFoot]

I watched it 12 times to make sure I remember

[jacklord]

I love how this video debunked myths about carbs like in seconds❤

[mamichulo]

dang bro. i finally found the answer to the long time question in my mind. i have the xr 200 motorcycle and i was not sure how to adjust the carb. thanks so much!

[Ryantomada-eh]

Thank you for making this videos need more people getting straight to the point😂

[grantleypotts]

Excellent information but I was hoping that you would explain how to set the metering needle height for the correct air fuel mixture.

[TylergoinLIVE]

Str8 to da facts wit a understandable explanation 😂

[strxrippin]

Mine is on the outside by the intake and i loosened it to the very end and oh my word the amount of engine response and power it suddenly had. The bike used to stumble whenever im taking off it would only run about right when im at about 2500 - 3000RPM but now its so smooth and it pulls hard im so shocked