How To Fix Timber Frame To Concrete #Garden #building #shorts

[geeztube]

When you insert the rod, twist it in the opposite direction to the threads, it eliminates the chance of the bolt threads leaving tracks in the resin/chem set and the bolt twisting out when tightening.
Also never squeeze a fresh tube directly into the hole, do 1 or 2 pumps to ensure the colour is consistant and the 2 chemicals are mixed well.... and clean the hole out. In this application it probably doesn't matter too much but good practise

[ShrimpChimps]

Compressed air, wire brush, air again, brush again.

The little blower leaves a ton of dust at the bottom and on the walls of the hole, preventing the resin from adhearing.

[nathanhatcher]

I just recently had to redo similar anchors in a garage due to the failing code inspection, the bottom plate should be treated wood obviously so the fastener or anchors should be either hot dip galvanized or stainless to resist corrosion when in contact with treated materials otherwise the adhesives and anchors used here to bond anchors should be into the footers not the stem wall.

[AdventureAddict]

In my country we put large square washers on.

[simonhinson]

Is it just literally a case of drill the hole, fill with resin insert the bolt let set and tighten ???

[Chucktender]

Hey handy tip. The nozzle of the anchor resin fits snuggly inside the end little Makita leaf blower nozzle. Then you can get it right into the hole then and clean it out properly.

[albertevans]

We usually put our anchor bolt in when the foundation is being laid. That just a regular bolt and not wedge anchor, it just doesn’t seem that secure to me

[vancepatton]

There is a sriver bit that fits the small hex on top that comes in the box so youbcan use a drill to put in g.

[Muelb]

The resin is not been mixed properly, the hole is not cleaned, not enough resin.

[stevenoe]

What tipe of resin is that i have always used big ass cage bolts redheads i think thats there name been a long time since i have done this did not no they had resin that was actually that strong on the market!!!!

[ThursonJames]

Cool, now will you please do a timber frame, as advertised?

[Maradon]

whats the purpose when the bolt can hold a skyscraper but the framing ist done out of junk wood the size of tooth picks and is attached with a nail gun

[Oma]

These are not anchort bolts wich expand inside to tighten

[haggispakora]

How does this actually work? How does the bolt not pull the resin right out the hole when it’s tightened? What torque is it tightened to? Anyone able to help ?

[anonymous-jtdu]

Theres bolts that'll bite into concrete with just a hole i forget the name but be stronger than a threaded bar and whatever that tube is

[briankelleher]

The diameter of the hole in the concrete is supposed to be bigger than that of the bolt. This is to allow room for resin. The hole should be clean too.

[vincentpereira]

You did that into the hollow block will it hold

[enekobilbao]

Donde es me gusta mucho lo profesional que trabaja

[Khadouj]

Pourquoi vous notez pas le nom des produits que vous utilisez pour les nulles ou vous comprenez simplement tout seul

[RayFury]

Why hand crank it instead of a power tool?