How to Fix Timber to Brickwork - Fencing and Gates

This is me putting up some fencing that relied totally on getting a good fixing between the new fencing post and brickwork. This method can be applied to fencing, gates, door frames or any other timber fixing where a really strong and durable connection is required.

Amazon links to tools and products used in this video...

The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do. As an Amazon Associate I earn from qualifying purchases.

[projectgaming]

QUICK TIP: Drill your holes before you cut the angle... that way they'll definitely be 90 degrees to the brick when fixed! Quality video as usual. 👍

[YoYoZamolo]

The problem with this video is that it is so good, you’ve convinced me I can do my own fence, but I know from experience watching you makes it look easy, actually doing it is another story 🤣

[robjenkins]

Everything about this procedure is spot on and very well explained. I've just used a similar method to fix a 100mm square gate post. For those with particularly brittle bricks or London's with the large frog, I'd suggest using 10mm allthread and chemical fixing adhesive such as Kem II. Recessing the timber holes is done in the same way, allowing for a nut and washer. Remember to check your thread lengths so they don't fall short to apply the nut and washer. For those keen on a fine finish can always plug the holes once complete.

[NAFO_Badger_Brigade]

Always clear! Greatest handyman teacher on the web! Love those fixings - seem so much better than the hammer in type which I've never been happy with!

[GaryAppledale]

This was a revelation. I was waiting for you to drill a hole large enough for a big old plastic rawlplug and you just screwed the bolt straight into the brick! I just never knew you could do that.

[Liveyourlifewithafatcigar]

I have no need or have any intention to do any But i love to watch a crafts person doing a job well & explaining all the pitfalls....
Thank you for sharing 👍🏾

[Shadman]

Great job! Used these bolts to fix my timber to the wall yesterday when I put a gate up. Never heard of them before but they fixed really solid.

[Clicknick]

Great video. Have done much of this over the years. I have drilled slightly smaller holes in the brickwork for concrete bolts to ensure. 10mm bolts, 10mm hole in post, 8mm holes in block/brickwork. I also drill and loosely fix bolts one at a time starting at the top, so you don't have problems if there is any movement.

[jatflash]

Well mannered presentation, good instruction and no fluff. Well done.

[donohoe]

Why have I not found you earlier! Excellent video, I'm crap at DIY but you take it step by step and explain everything without it becoming boring. Really pleased I've found you. Thanks mate, keep up the good work

[iwlzgcq]

This concrete screws idea will solve my current problem of an existing post has come loose from what looked like thin screws into rawlplugs into house brickwork.
The whole fence is unstable at the house end and raking it apart is not in my capability or strength. I can drill through the wood post in situ though and put those heavy duty concrete screws in. Grateful for this video!

[stevebeal]

I had a similar issue a few years ago, but wanted to fit a gate. I didn't bevel the fence posts though - I simply fitted the hinges to the flush fence posts in the normal way and let the hinges absorb the angle. Worked well and looked good!

[viper]

At last somebody who knows what they are talking about! Good tips good advice!

[andyr]

Literally thousands of videos on YouTube and this video is recommended everyday.

[jimporter]

Remembering that the countersink should not be based on the size of the bolt head but the size of the socket you’re going to use to fix it.

[RandomnessTube.]

I watched this in full and enjoyed it I must be getting old.

[debbiefinch]

WOW! Once you mentioned bevelling the post i nearly tuned off - far too complicated for me I thought - but you simplified working out the angle so well that even an idiot like myself can work it (not that i need to because my wall and fence are parallel to each other!) The only other element I found not very DIY basic was the laser thingie - not got a one of those and don't want to waste money on a piece of equipment just to attach 3 posts. Had tuned in mainly to see what you used and was pleasantly surprised to see no raw plug required. Years of doing my own DIY from laying patios, house renovations, electrics, plumbing - i have never plucked up the courage to drill into brick!! Flippin' simple following your video!!Thanks alot!! x

[taters-nogj]

Going to be doing a gate and a little bit of fencing. I was worried about the screws I'd use, or if I needed to use rawplugs, etc, and whether to drill into the mortar or brick. All questions answered and all concerns set aside.
Excellent vid.
Many thanks 👍🏻

[saajanji]

Brilliant no long winded story telling, few ground rules and off we go. We'll done

[MattTaylor-ujye]

A spade bit produces a counter bore. A countersink is typically 45 degree taper for countersink screws. Yes a good informative video.