Cutting 1/4' Acrylic

Finishing cutting the acrylic on the Alphabet Piggy Bank project on the Stepcraft M.1000 CNC machine starting with the Amana Tool item no. 45626-K 3 flute 1/4" diameter 90° Spektra™ coated v-bit links to all tools below!
- - - - - -
#TeamTOOLSTODAY
- - - - - - -
RPM: 18,000
Feed Rate: 60ipm
Plunge Rate: 20ipm
- - - - - - -
I then switched out for the Amana Tool item no. 51411-K 1/8" Spiral 'O' flute upcut bit to drill out the screw locations where it will mount to the wood.
- - - - - - -
RPM: 18,000
Feed Rate: 60ipm
Plunge Rate: 30ipm
Peck drill: .0625" per pass
- - - - - - -
I then switched out for the Amana Tool item no. 51404-K 1/4" Spiral 'O' flute upcut bit to cut the outside profile of the acrylic for a beautifully clean cut!
- - - - - - -
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 100ipm
Ramp in: 2" smooth ramp
Peck drill: .25" per pass
- - - - - - -
#short #shorts

Tools Used:

STEPCRAFT M.1000 CNC Machine
- - - - - - -
Design Software - Vectric V-Carve Pro -
- - - - - - -
Amana Tool 45626-K SC Spektra Extreme Tool Life Coated V-Groove 90 Deg x 1/4 D x 1/8 CH x 1/4 Inch SHK 3-Flute Router Bit
- - - - - - -
Amana Tool 51411-K CNC Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/8 D x 1/2 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bit with Mirror Finish
- - - - - - -
Amana Tool 51404-K CNC Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/4 D x 3/4 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bit with Mirror Finish

[yunyunnie]

idk what's going on but I'm enjoying it, thanks man

[neon_ledyou]

Hı What is the feedrate and spindle speed

[storytellerHD]

Can you post the links to these three bits please? Thanks.

[MinhTran-bpqv]

Hi Sir, i have seen you use 3 tool for acylic, do you show me detail one by one Sir. Im from VietNam, English not good sorry.

[abdalrahmankarkutli]

What I need to know is how to stick the acrylic on the base ?

[nandan]

Hi there, don’t you use tabs to keep the work piece stable during the cut?

[VIDAVIVIDAVID]

Saludos amigo me puedes dar el modelo de tu CNC cuál es me interesa para hacer trabajos como los tuyos estoy en España y me gustaría aprender de tus trabajos gracias

[JesusHuertamusicshow]

Could you tell what Cnc router it’s that? Please

[smxqobd]

Hand-cleaning! So 20th century. Was this even designed by Jules Verne?
Your CNC machine lacks one decisive tool: A vacuum hose attachment. Time to upgrade your game!

[DavidGP]

Can somebody please make that bit type joke again?

[dohertybest]

Evening boss like ur channel so much can u help mi write my name on a platform for mi plz my birthday is coming up on the 1st