How to Create Your Own Car Parts with This 3D Scanner - 3D Maker Pro Mole 3D Scanner

Check out this 3D Maker Pro Mole 3D Scanner - a great way to scan car parts and make new ones! With this scanner, you can scan car parts in amazing detail and have them printed out as 3D models.

This scanner is perfect for anyone looking to make their automotive repairs or modifications easier. By scanning car parts and making 3D models, you'll be able to fix your car quicker and with less hassle!

Use Code RandyMay to save $10 when buying the Mole 3d Scanner

Other Helpful thinks for 3D Scanning:

3d Printer Filament That I Use:

Amazon 3D Printing Filament:
________________________________________________
Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
#3dPrinting #3dScanning #DIY #RandyMay #mx3

[randymay]

Use Code RandyMay to save $10 when buying the Mole 3d Scanner


Other Helpful thinks for 3D Scanning:

3d Printer Filament That I Use:

Amazon 3D Printing Filament:

Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍

#3dPrinting #3dScanning #DIY #RandyMay #mx3

[natecote]

1:13 baking soda mixed with alcohol in a spray bottle works just as good

[shitmyhellcatsays]

I took the HP Academy course, good intro to CAD. Cannot wait for my scanner to arrive.

[modisumocustoms]

Mines on the way. Can’t wait to get started!! Nice video.

[ChadMees]

Great video and this is the exact reason I bought mine. I was disappointed that the luxury kit did not come in the hard case like all of these preproduction models. The software definitely leaves a lot to be desired but it works ok.

[iangraham]

I bet I could model them faster in Blender than the time it took to scan and process them 🤔

[JoseAguiloworkshops]

Can you make a video how to align a part? Like align top, then the bottom. If you turn your part upside down. Thanks

[niklas_hass]

Really great video, thank you so much! Would it be possible to scan a standard BMW Mirror Cap and print it in 3D and laminate it with Carbon Fiber afterwards? 💯

[dangerous]

I have a 3-D scanner, and I can barely find uses for it. I have to be honest. Even as a fabricator and artist there’s almost nothing that I can’t make with a ruler and caliper.

I got a good deal on it so I’m gonna hang onto it until I can find a use for it.

[jsando.]

Reflector from your Mazda MX3?!? What! That’s awesome! KLZE or BPT?

[Nhudt]

Did you take the course? And did you like it? I was thinking about taking it too. Thanks for the video

[vdm]

Thanks for amazing video! Which kind of fillament did u use for your printouts?

[macan]

what fillament type did you use for exterior parts of the car?

[SandeepSingh-]

Can I send you something to scan. When you align the scans, and choose points, does the point snap to the scanned file?? Meaning if you had to make four scans, and you have to align it, will the point have a variation in location, or the point will snap to the scan location you choose.

[waltw]

Randy, what are your thoughts on the RevoPoint MINI 3D Scanner, have you evaluated it yet?

[AlmightyAetius]

Could I use this device to scan on a large scale? Like the whole front end of a car for example

[jochem]

I used the Aesub scanning spray and I'm not going to buy another can. It's 3x as expensive as I'm willing to pay.

[Gorilla_Jones]

Can i use this to scan my bumpers? I design parts in clay. Thanks

[AverageGamerJoe]

would you recommend this over the creality scan lizard 3d scanner?

[ZKTVtechedu]

Exactly how many hours of scanning it takes for you to come up with a satisfactory cad model of this part !!?