Standing seam roof installation

Standing seam metal roof installed by M&M Construction Services LLC, in Vicksburg MS. Call Michael 601.750.2274

[MrVIGUY]

Hey Michael,
I have watched many videos of the installation of standing seam and I have to say that you are truly on point. I have been installing SS since about 1985 and presently own 3 different machines. Standing seam is all about clean lines and symmetry and you certainly have that under control. Hooked panels, folded tabs on the legs, hooked valleys. There are a lot of hacks out there but you are not one of them. I'm not easily impressed but your work looks top notch.

[firestone]

I'm a  maintenance mechanic supervisor never installed a metal roof before, maybe in the future But I always appreciate a good thick of the trade, THANK YOU FOR SHARING THANK YOU FOR YOUR TIME

[erroldillon]

I’ve been doing research on how to do standing seam roofing and this is the best I’ve seen so far. Top of the line!!! If anyone is about to do standing seam this is the video to watch! Excellent video!

[veryinteresting]

Standing seam is super detailed work. You make it look fun. Well done friend.

[douglaswilliams]

oh I just love crap like this. those guys are obviously well salted pro's. I wasn't that familiar with metal roofing systems. 1) I didn't know it was so complicated to get that professional, finished look 2) I didn't know that if you listened carefully and payed attention you could learn so much. maybe not so much to give it a go like I'm going to, but enough to enjoy sitting and watching it again. Huge tremendous Qaalpla's to America's backbone. The tradesmen. subbed. thanks for the educational fun guys.

[jamiebrierly]

Nice to see someone else know how to do it correct! Always lock gutter edge on hookstrip instead of putting a gasket screw through a nice looking panel and use cleats in valleys and transition and z strip under cap and transition!

[BG-xqjg]

Beautiful job guys... I wish I could have done videos back in the 80s and 90s, so when my contractor said what's taking so long... let me show you the detail involved

[howtodoitdude]

I like that you used both a vapor barrier and sleepers. Nice quality work!

[hardset-vize]

I notice you did not bend the tops of the panels up at the tops. I did a standing seam metal roof (snap lock/champion roofing) about 10 years ago and the OEM told us to cut notches on the top of each course and use the bender to bend up the very top lip at a 90 degree angle. Then use a high quality caulking and seal off the two inside corners. Then bring the Ridge Cap down over the 90 degree bend up areas and use neoprene washered fasteners to secure the Ridge Cap down thru the tops of the standing seams. It held great. The 90 degree bend ups prevented strong winds from blowing water up under the Ridge Cap and coming in on the very top where the two opposing sides of the roof met. Don't let anyone tell you water won't run uphill regardless of grade. Think hurricanes!!! The roof is holding up fine...no complaints from the PHD engineer who paid me $1, 264, 500 for the place. I was wonder if and why the technology has changed? Seemed like a good system?

[roycepavich]

Lovely work guys I’ve done a few tray roofs here in New Zealand !

[ajflores]

One of the best roofing panels. No seamer required .

[fedorscupahins]

Guten morgen Kollegi работаю в стокгольме 8лет СТАНДАРТЫ ДРУГИЕ ...В РИГЕ 20 ЛЕТ РАБОТАЛ ПО НЕМЕЦКИМ ....УДАЧИ ...

[stratmister]

Doing a great job, some installers I've seen don't pay attention to those details and you end up with leaks, beehives, wood rot.

[bobbyjones]

very nice and clean. I am a roofer myself but never installed a standing seam roof. It looks a little tricky when it comes to a valley
or change of pitch. I can tell this isnt your first job but you do good work.

[RobChapala]

Nice, much different than the barn roofs you see going on for real cheap

[UberKrispy]

Nice to see a guy who knows what hes doing and takes pride in his work too. Keep up the good work man.

[choiceblade]

Huh, "...we mighta turned upside down on ya...". All good, bruv. You practically sold me a roof on this one. PLUS, ya got my sub. That was some great work treating metal roofing right. Dang. Hurricane Harvey just wiped my town off the face of earth. I'm getting my roof right. Thank you.

[jamiebrierly]

Also one thing I have did in past under my transition behind my z strip is food the back of my panel up 3/4 inch or so just in case anything ever gets past my z strip! U did a awesome job and just one thing I have learnt passing it on to ya! I do a lot of older style true standing seam with turne metal where metal comes in a roll and make it all by hand and double locked etc! Looks nice, good job again!

[CharliesTA]

Wow, so glad my metal roof install won't be this complicated! Above my paygrade!

[mbthgenerationgames]

Nice work this is what I do for a living over 12 years now and still going