Full SIM COCKPIT for ONLY $399 🤯 | Next Level Racing GTRacer Review

Reviewing the new Next Level Racing GT Racer - with a great new design, includes a seat, and at a really good price point. If you're thinking of upgrading your sim racing setup then this is a good contender, as it easy to put together and has a really nice aesthetically looking rig that doesn't take up too much in your room

💲Check prices / 🛒Purchase here:

AMD Ryzen 9 7950X3D 16-Core Processor
AMD RX 7900 graphic card with 24GB
32GB of RAM
and a 2TB SSD

Geek Street is a participant in the respective affiliate programs and Amazon Associate Affiliate program; as an Amazon Associate I earn from qualifying purchases with no additional cost to you

Creator Code for 50 Additional Entries: GEEKSTREET

Content TIMESTAMP
00:00 Intro
00:55 Unboxing
01:18 Assembly
03:58 Design
04:39 Adjustments
05:13 My racing gear setup
06:04 My Thoughts
08:08 Bye

Playlists, you may be interested in:

If you enjoyed today’s video, please leave a COMMENT, drop a LIKE and SUBSCRIBE to the channel

#geekstreet #simracingsetup #gtracer #nextlevelracing

✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️

🔔 Don't forget to Like this video and Subscribe to our channel (IT'S FREE)

➡ Follow us on Social Media

➡ Free Amazon Trials

✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️

[GeekStreet]

GTRacer - Let's go
5% OFF with GeekStreet USA ONLY

[soccersensation]

Easily one of my favorite channels. I have zero intention on purchasing this but watched the entire thing. Keep up the great work. "GT RACER".

[blacksto]

GT Racer. Awesome review - I'm just about to get my first cockpit, thinking about this one already :D

[mr]

Another great review bro, always look forward to your videos 👍🏼👍🏼👍🏼
"GT RACER"

[denesk]

I am 6'2'' and it's a bit on the small size. If I have the seat all the way to the back, I have to put the (Fanatec) pedals all the way to the front. Talking of which: you cannot put it all the way to the front, because then I cannot switch from gas to brake without hitting the bar.

Also, for that height I think I will have to flip the wheel mount backwards (to get the wheel closer to me and have the pointy side facing me).
I will probably have to drill an extra hole in the seat mount and have to move it about 50mm more to the back.

Flex: well, using it with a load cell pedal, I can see some flex when stepping on it hard. Tightening everything more helps with it to a certain degree.
Yes, the handbrake/shifter kind of flexes, but that's not bad at all.

I think you can mitigate the flex by tying the whole thing down (with the kind of pipe fastening U-bolts. That will work for me as I wanted to put this on a platform with wheels anyway. The flex (when pressing the load cell) comes from the middle of the bottom actually rising a bit, so if it's tied down at 6 points (or 5, 2 front, 2 mid, 1 rear) that it will be very stable.

My biggest grief is the seat. It is not uncomfortable to sit on (for your butt), but it is on the narrow size. I am thin but have broad shoulders and it feels a bit crammed.

I think if you are over 6' or 182-ish cm, it is better to consider something more adjustable and mount a real car seat onto it. My next rig is going into that direction.


Just my 2c ...

[Username.]

Guys I think there’s some bolts washers and nuts

[Jkuup]

Never heard bolts washers and nuts so many times :P great vid GT racer

[mp_]

Could you do a full video on your custom PC? Showing off the entire components lists and going into the parts you picked and why, along with performance stats?

Looks cool and love to learn more

[KWHCoaster]

Nice review.

I've never been overly satisfied with the cockpits I've seen. Either looked too flimsy or pricey. Eventually I just made one with some 1-1/2" ABS pipe, fittings, 1" pine panels (for wheel, shifter & pedal decks), U-bolts and 3/8" bolts to fit my Logitech G25 wheel and Rocker gaming seat. And I can adjust the Rocker seat and it stays in position. The wheel deck also serves as monitor deck for a 32" 2K monitor. I used to park it in front of the 42" HDTV. I use a Logitech X-540 5.1 speaker system for audio and the Rocker seat has audio in. Pleased with the result, the tubular frame looks cool and is solid, zero flex. Only tools needed are a electric drill, hand saw, wrench and ABS cement. I got all the materials at Home Depot and Canadian Tire.

[wwjnz]

A whole rig for less tan the cost of the rear seat frame and a seat from GT Omega for the Apex wheel stand. But it flexes more than a bodybuilder showing off.

I think I'll pay $250 more and get a profile cockpit.

[phlexipus]

Have you thought about the Bolts Washers and nuts?!? nice vid tho😂❤

[antminehead]

GT Racer - good review, could be my Christmas present me thinks.

[makguy]

I built mine out of wood and it looks nice too. Painted and shiny. Gonna add racing stripes one of these days.

[simmadpaul]

Great video. Was considering buying this but alarmed at how much flex there is in the steering wheel mount.

[l_t]

Is it smarter getting the Gt Racer or the gt lite pro

[TypeZero]

Can you mount the shifter on the right side?!

[EverythingBallard]

“bent it out using a screwdriver” lets me know everything i need to know about material quality. 😂😂

[Ahmad-qjij]

Will this support a sim magic alpha 15 nm ?

[Simracingandpiano]

can i mount the fanatec clubsport v3 inverted pedals on it?

[vxukct]

i wonder if NLR bought the design from GT Omega, this rig is neigh on identical to my GTOmega rig.