Klik2 lost/forgot Code

Did you forget the code? How to fix your remote keypad!

*1= Linear garage door openers manufactured from 1997 to present.

*2= Chamberlin, Sears, Craftsman, LiftMaster, Master Mechanic and Do it garage door openers manufactured from1997 to 2004 (Orange learn Button)

*3= Same as *2 above, but manufactured from 2005 to present with a (Purple learn Button)

*4= Same as *2 above, but manufactured from 1993 to 1996 with a (Green learn Button)

*5= Genie Intellicode and Overhead Door garage door openers manufactured from 2005 to present (315 MHz).

*6= Same as *5 above but manufactured from 1995 to present (390 MHz).

*7= Stanley garage door openers manufactured in 1998 to present.

*9= Wayne Dalton garage door openers manufactured in 1999 to present.

[Kayak_Googan]

It's really easy to reprogram your unit:
Step 1. Hold down the (*) and the (#) keys until the keypad stops flashing.

Step 2. Determine your opener ID using the list below:

*1= linear garage door openers manufactured from 1997 to
present.

*2= Chamberlin, Sears, Craftsman, LiftMaster, Master
Mechanic and Do it garage door openers manufactured from
1997 to 2004 ( Orange learn Button)

*3= Same as *2 above, but manufactured from 2005 to present
with a (Purple learn Button)

*4= Same as *2 above, but manufactured from 1993 to 1996
with a (Green learn Button)

*5= Genie Intellicode and Overhead Door garage door openers
manufactured from 2005 to present (315 MHz).

*6= Same as *5 above but manufactured from 1995 to present
(390 MHz).

*7= Stanley garage door openers manufactured in 1998 to
present.

*9= Wayne Dalton garage door openers manufactured
in 1999 to present.

Openers with learn Buttons

Programming: Enter the PIN that you want to use, remember
(4) digits only. then press #

Enter ID # from list above, for example 2 then #

Press and release the Learn button on your
garage door opener.

Enter your (4) digit PIN and press (0),
for Genie and Overhead door units press
(0) twice. To test and use wait for light to go out
on keypad, Enter you PIN and press (0).
Note: If opener doesn't function repeat programming.

[marcosf]

All these years later and this was still the quickest and easiest video to follow to reset the garage keypad on the home I just purchased. Thanks!

[chrisgraef]

Thank you!!!! I've been trying to resolve this for 10 minutes then found your video

[alisonallan]

Once I figured out the right number for my garage, worked like a charm. Thank you!!

[charlesmcgee]

Your video was the 2nd video and I got it on the first try, thanks homie appreciate

[legendaaries]

You are a lifesaver! No other guides I found online worked for my Genie garage door opener. Thanks again.

[norman]

Thank you very much. Easy to understand your instructions, it worked right away.

[Windsorbronco]

Thank you so much man!! Saved me a ton of time!!

[cityofoaks]

Thanks for the video. It worked for us.

[laraleon]

Thank you! It worked for me! I saved some money doing it myself

[tomlenehan]

Very Nice! Thanks for a concise and complete how-to. In the instructions I wondered about the second "0"-- "cuz it's a genie" --I tried it with and without the second "0" and my "Overhead" brand opener worked ONLY with the second "0". Thanks, Joshua.

[icyte]

IF IT ISNT WORKING, THEN YOU PROBABLY HAVE A DIFFERENT TYPE. I had type 3 and there are certain instructions for each type so don’t give up yet and go to the link in his bio. This video was also very helpful so make sure to watch it

[jwes]

Thank you so much! This worked perfectly

[hammya]

Very helpful, thanks for posting! Used it!

[DavidDLPE]

All of this worked very well, thank you. But now, how do I set the new code?

[Moesmusic]

I can't find the first part of the video where he tells you how to find your garage door opener code.

[bethhill]

I can't seem to get mine to work? I have a #2 garage door opener?

[discotea]

what do you do if your garage door opener doesn't have a learn button. Its an old stanley professional that uses only dipswitches.
I tried to change my code but messed up and can't figure out what code i changed it to.