Transmission High Gear Kit Install - Polaris RZR Xp Turbo

In this video we show you how to install SuperATV's high gear kit into a Polaris RZR XP Turbo.

Whether you call them high gears, overdrive gears, or just the stuff that makes you go fast, you can count on SuperATV’s High Gear Kit for the Polaris RZR XP Turbo to raise your top speed and lower your high range RPMs. It comes paired with a custom clutch kit to give you a 24-27% speed increase. If you’ve got a Turbo, you like going fast—SuperATV’s High Gear Kit makes going fast easier.

FEATURES
-Gives you a 24–27% speed increase
-Reduces RPMs at mid to high range
-Changes overall gear ratio from approx. 12:1 to 9:1
-Made with case hardened 8620 chromoly steel
-Affects high range only
-Backed by a Lifetime Warranty

Order your high gear kit today:

00:00 Intro
00:03 Tools List
00:06 Remove Rear Wheels and Tires
01:31 Remove the Hub
02:28 Remove Primary and Secondary Clutch Bolts
04:06 Remove the Primary Clutch
05:43 Disconnect Clutch Cover from transmission
07:08 Slide off the Inner Clutch Cover
08:03 Remove Pin and Shims
09:20 Disconnect the Vent Tube
10:24 Clean the Transmission
11:51 Remove the Splined Gears
13:16 Inspect the Transmission
14:05 Remove the Idler Gear
15:50 Inspect the Bearing
17:20 Install the new Hub
19:23 Remove Stock Bearings
20:15 Press in the new Bearings
21:09 Reassemble the Transmission
22:38 Clear out any debris
24:35 Make sure the Gears are meshing
26:52 Reinstall Shift Drum Components
28:24 Apply Silicone
30:29 Slide the Spring into Place
31:45 Install the shift lever
32:43 Begin Reinstalling Transmission
36:11 Line Up the Threaded Plate
37:16 Pick up on the Transmission
39:05 Attach the Transmission to the motor
40:28 Slide Clutch Cover into position
42:25 Line up bolts going into the Motor
43:38 Start Tightening Hardware
44:33 Check Your Alignment
45:44 Tighten Bolts and Reinstall Wiring

[jasonwieber]

You guys still make this kit, I can't find one for the life of me

[kylegohawks]

Was that the first time he ever used that style of bearing puller? It's a different style than most have ever seen

[uncleq]

Can you do the high speed gearing along with lower gearing for low gear?

[vector]

I like how easy the primary comes off and the axles pop out in this video. Almost stopped watching after that bit of fiction.

[kelsodavis]

What’s the benefit of installing? Didn’t think these came with a lower high gear like the high lifter

[michellerobertgriffin]

bought a super atv transmission and it failed in less than 1000 miles. They give you 30 day warranty. We’re gonna crack it open and see why.