1972 GT6 - Part 97 - Rebuilding The Carbs

Rebuilding the second carb is the last thing we need to do before we move the chassis to the spot light and put everything together in attempt to start the engine. While we rebuild the carb I also try to explain how all the little valves and vacuum ports work.

Rusty Beauties Website:

Buy Rusty Beauties merchandise:

Join the Rusty Beauties Facebook group:

If you like this channel please consider supporting it! It takes lots of time and effort to film and edit these videos and your support will help me spare more time for that!

If you wish to support it on Patreon you can do it here:

If you wish to make a one time donation you can use this link to make PayPal donation at any amount:

The financial support to the channel doesn't buy you anything special. There is no such thing as early access or VIP content here as I don't want to take away from those who can't afford it. The financial support is your way of saying "Thank you Elin for taking the time to edit these videos!", but only if you feel like it and you can afford it. Just being here, watching, liking, sharing is also a big support and I appreciate it.
THANK YOU!

#rustybeauties #GT6 #triumphGT6

[andycasiello]

Thank you, Elin! I have a 1976 TR6, with those Zenith carbs, so I am thrilled to see an episode where you take them all apart and talk about the function of each component. Thanks for all of the great videos! Here is to many more in 2025!

[OGMBG]

Wow. This has to be one of your best videos ever, Elin! I see you’ve got your new gimbal working. Perfect.

[carlelliott]

I feel your pain Elin, looking for parts, I spend half my time looking for parts, your gearbox and carb build has come at the right time for me, thanks for documenting this for all it's appreciated

[BruceBoschek]

Wow! I had no idea they were so much more complicated than SUs! This is truly a perfect instruction video for rebuilding these carbs, one of your best I would say. Thanks Elin!

[alanvinegar]

Thankyou for all the detailed explanation on the various components on the ZS carburetors. Even Dr Carburetor can learn something 😂

[dougaustintx]

Best step by step of overhauling a Stromberg carb ever ! Thanks Elin

[ThePerformanceVideo]

And I thought the SU HIFs on my MG were complicated! Great video and step by step explanations.

[yobop]

...back in the 70s, we teens had triumphs and British Leylands...working on these carbs without alot of information, but we got them tuned, by ear mostly...remember to oil anything that moves...we didn't have plating and sonic crap, just wire brushes and wheels😮😢...glad to see you working on the 6....happy new year, and to chef...

[Horsleyclassics]

Hi Elin, the temperature compensators are more trouble than they are worth and just make the carbs harder to set up, on my twin stroms I just tightened the screw down to close them permanently.

[barry]

Thanks Elin a lot of great information in that video. Should be useful to a lot of people.

[TRAjim]

Geez, the SU HS6s I have on my 4A, are so much simpler! Even I can rebuild them!!👍

[andyfearn]

Restarting a stalled project is a headache. As is DIY electroplating. Have a can of Stella Artois it helps 👍 Good luck

[johnmalone]

Happy New Year Elin and all your viewers

[Horsleyclassics]

Another note with the diaphragm when you lift the piston it should drop back down smoothly and freely onto the base of the carb with a slight thump if it’s slow to drop or gets stuck then loosening the four screws on the top cover to help free it up. It can be a bit if a fiddle to get right.

[tomswindler]

Strombergs carbs you do like to test yourself don’t you, great video as always.car is coming along, can only do what you do, when you can.good job.just continue on.👍👍👍😎😎😎

[nicktomasi]

Happy New Year to you, Elin!!. May you all enjoy prosperity and most of ALL good health during the year. Nick & Kathy

[lordleonusa]

About finding the carburettor parts, rule Number One, NEVER EVER throw anything away, take photos as you go, ziploc bag everything, with notes in the bag, cand keep everything together! When you remove parts to use other parts, keep everything you took off.

[tomcoulter]

Was wondering if you used any cleaning agent in the ultrasonic cleaner? I see some amazingly expensive solutions available online, but the sonic cleaner I bought in the '90's says to only use distilled water in it. Not sure why, I'm fairly certain the tank is stainless. Haven't used it in a while, but it's time now for me to clean up a set of used Strombergs I want to put on my '74 TR6 this spring. I was thinking of adding some Simple Green or such to the water. Thoughts anyone?
Oh yeah, I think my "delay" in starting this project was waiting for you to do this video series!

[StevenSlivinski]

Thanks Elin. (What is your beautiful black Lab's name? Mine insists on being in the garage with me when I am working, too.)
I recently rebuilt the carbs on my friend's 74. Someone else had there hands in it previously. I had to buy another carb for parts because the air valve tube actually cracked when using the adjuster tool. The needle jet was frozen and so was the spring loaded set screw. No evidence of a star washer, either. When I install a new star washer, I will put the needle jet in place with the jet almost fully unscrewed, then the star washer - otherwise I fear that the star washer may prevent the jet from adjusting richer (raising). The set screw had to be doused in carb cleaner and then put in my ultrasonic cleaner to loosen up the spring. The set screw really just prevents the jets from rotating - not holding them in place rigidly, except for the spring tension, right? Otherwise it would have to be loosened and tightened while adjusting the mixture needle.... Or does the damper piston prevent it from moving??
Your videos are great!
(I used a plating kit from Eastwood to plated the spoke nipples on a Norton I was working on years ago....Something to do during a cold winter. lol)

[russnixon]

That white powder is likely to be aluminum oxide or zinc pest. Aluminum oxide (Al2O3) is very abrasive and should be removed completely. Zinc pest is unlikely because of improvements in zinc alloys since the 1940s but it should be cleaned off using vinegar.